This paper presents an investigative study of double-passed welding parameters on single V butt joint. In this study, a robotic welding system ABB IRB 2400/16 with digital welding power source KEMPPI Pro Evolution ...

It is well known fact that by using water as a cutting media will hinder the pollution into the environment and cost effective make a water jet cutter is widely used in an industry. The water jet cutter is the industrial ...

In this study, machining effect of variable parameters on surface integrity of titanium alloys (Ti6AL-4V) thread was analyzed. The cutting was performed in dry machining with PVD Aluminum Titanium Nitride (AlTiN) ...

Manual industrial robot programming for contour tracking process such as in gluing application is quite tedious and time consuming process. A lot of points need to be taught alongside car huge glass panel windshield ...

Noncontact Contour tracking is important aspect for industrial robot to autonomously follow contour in order to do online welding, painting and automatic application programming. Normal approach of contour tracking ...

In today automotive industry, many features are added in power window system. For produced its safety system called, Anti Trap System, with immediate reversal of the window in the event of entrapment. Thus, it gives ...

Aluminium alloy Al6061 is one of the most widely used alloys in the 6000 Series. This standard structural alloy, one of the most versatile of the heat-treatable alloy is popular for medium to high strength range from ...

Aluminum 6061 is an example of marine grade alloy that contain up to 1.2 %of magnesium and 0.80% of silicon as a major alloying element that provide good corrosion resistance properties. However, under the certain ...

The purposes of this experiment are to study the effects of corrosion behavior of an as-cast ER5356 filler metal and to define the weight gain in kinetic oxidation analysis. The specimen was subjected to high temperature ...

Filler metal ER5356 was used to weld aluminum alloy AA6061 in order to investigate the effect exposure. This study was determined by using Scanning Electron Microscopy (SEM) to investigate the morphology of microstructure ...