1. Research Paper: Recent submissions

  • Investigation of Indoor Wireless-N Radio Frequency Signal Strength 
    Ali, Abdul Halim; UniKL BMI (IEEE, 2011-09)
    Wireless local area network has become the most popular networks in connecting to internet especially at home, universities, hotels and workplaces. Therefore understanding the radio frequency behaviour of WLAN is vital ...
  • Investigation of Outdoor Fading Model Over Indoor Environment 
    Ali, Abdul Halim; Abd Razak, Mohd Raziff; UniKL BMI (IEEE, 2011-06)
    Wireless access network has becoming vital tools in maintaining communications especially at home and workplaces. Due to cost effective, easy to install and maintaining wireless access network or wireless local area network ...
  • Development and Improvement of Variable Message Sign (VMS) System for IT IS Application 
    Yunus, N.H.M.; Abd. Aziz, P.D.; Hamidon, F.Z.; Rahman, A.H.A.; Salih, N.M.; UniKL BMI (2013-12-02)
    This paper discusses on the application of the Variable Message Sign (VMS) system for the Integrated Transport Information System (ITIS). The application focuses on the development of the Visual Basic (VB) software to ...
  • The Influence of Solid Lubricant on machining quality in turning of S45C Mild Turning 
    Izatul Hamimi Abdul Razak, Nor Khamsi Ahmad; Siti Hartini Hamdan, Mastura Samsudin; Mohd Shahril Mohd Yusop (2013-11-28)
    Product quality is one of the crucial criteria for the evaluation of turning process. However, heat generated in the cutting zone during machining might deteriorates the surface quality especially because of the tool ...
  • Odor Recognition Using Fuzzy Logic Algorithm 
    Azahar, Ratnawati, I T. M; Shariffah Nur Rasyidah, NurAtiqah Nadiah (2013-11-27)
    Fuzzy plogic pis pone pof pthe ptechniques pin pArtificial Intelligent p(AI) pthat pwidely pused pto pcontrol penvironmental factors. The effectiveness of fuzzy logic has been proven through a plot pof pcreation pof ...
  • Online Lerning in higher Education Institutions Insights from learners 
    Nor Aini Binti Abdul Rahman, Fauziah Binti Abdul Rahman; Faradina Binti Ahmad (2013-11-27)
    Online learning is gaining importance as more universities around the world are steadily increasing their use of online courses as a means of generating lifelong learning (Jacobs, 2013). If online course modules are ...
  • Tool Life and Surface Roughness of Titanium Based Alloy In Near Dry Turning Condition 
    Muhamad Azri Bin Shamsuddin, Siti Hartini Hamdan; Ahmad Yasir Md Said, Azman Ismail (2013-11-27)
    In this study, the uncoated micrograin tungsten carbide was selected, as this cutting tool has a good abrasive on wear resistant and toughness. Two level of cutting speed, feed rate and depth of cut were uses to complete ...
  • Microstructure Analysis on flooded thread cutting of titanium Alloy Ti-6Al-4V 
    Siti Hartini Hamdan, Mohd Naqiudddin Hussin; Ahmad Yasir Md Said, Azman Ismail; Izatul Hamimi Abd Razak (2013-11-27)
    This paper investigate the machining effect on surface integrity of titanium alloy thread with flooded cutting method and the PVD Aluminum Titanium Nitride (AlTiN) coated as the cutting tools. Two conditions of tool ...
  • Project-based Learning (PBL) for Object-Oriented Programming Laboratory 
    Nurzulaikhah Nadzri, Muhammad Sobri Ramli; Norzanah Md Said, Yusman Yusof (2013-11-27)
    The theoretical aspect of Object-Oriented Programming (OOP) is a difficult subject to understand. As the approach in teaching the engineering technology students is different from the the other engineering students, ...
  • Wireless Heart Rate Monitoring System 
    Noor Hasyimah Abu Rahim, Suhaimi Abdul Rashid; Muhammad Raiq Mohd Rosdi, Norzanah Md Said; Siti Norhafiza Abdul Razak, Farah Hana Mukhtar; Siti Khadijah Ismail (2013-11-27)
    This paper presents the realization of a remote heart rate monitoring system for continuous long-time patient monitoring from one location as a part of diagnostic procedure. Heart rate, one of the most important ...
  • A Study of Overall Equipment Effectiveness in Cold Drawn Bar Manufacturing Line 
    Siti Norhafiza Binti Abdul Razak, Muhammad Amirul Asyraf Ab Razak; Mohd Khairi Mat Noor, Farah Hana Mukhtar; Noor Hasyimah Abu Rahim, Norzanah Md Said (2013-11-26)
    This study is about finding the Overall Equipment Effectiveness (OEE) that can be used in order to improve the equipment and manufacturing line performance. Overall Equipment Effectiveness is one of the performance ...
  • Intermetallic Compound (IMC) Analysis by Using Isothermal Aging Testing on Lead Free Solder 
    L.Chee Ping, Azrina A.; Ismail S.A (2013-11-26)
    Lead free solder has been attracting a lot of attention in the recent years due to elimination of the use of lead in the electronic industry. One of the important behaviour of soldering analysis is Intermetallic Compound ...
  • Tool life of Micro-grained Uncoated Insert and Surface Roughness in Turning Titanium based alloy (Ti6Al4V) under Dry and Near Dry Condition 
    Ahmad Yasir M.S, Azman I; Zailan K, Mohammad Iqbal (2013-11-26)
    raditionally, machining titanium alloys only can be achieved with low cutting speed, massive cooling lubricant and at lower feed rates. Since the application of Minimum Quantity Lubricant is employed in recent machining ...
  • Engine Monitoring System; to produce an engine Tuning Monitoring System By Displaying Air Fuel Ration and Engine Knocking on dashboard panel 
    Noor Azammi B. Abd Murat, Jufriadi; Sobri Bin Ramli (2013-11-26)
    The project is developing a device that can analyze the air fuel ratio, where the oxygen sensor is function to detect the emission system, such as carbon monoxide, oxygen, nitrogen oxides and unburned hydrocarbon ...
  • Skill Sought by Malaysian Industries Towards Engineering Graduates 
    Ridzuan Md. Sham, Norsehah Abd Karim; Siti Hajar Mohamad, Tuan Zulia Mastura Tuan Soh (2013-11-26)
    Lately, numbers of unemployed graduates has increased and become quite an important concern for the higher education around the world. There are debates on what causes this problem and how can the government overcome ...
  • Entrepreneurial Intention Among Engineering Technology Students in UniKL MFI 
    Salwah Che Mat, Siti Mistima Maat; Norhatta Mohd (2013-11-25)
    The study on entrepreneurship and the factors that lead people to become entrepreneurs have developed into an interesting topic for research. encouragement for Malaysians to adopt entrepreneurship as their career choice. ...
  • Preliminary Design and Fabrication of a Prototype Spherical Robot 
    Murniwati Anwar, Mohamad Norhafiz Ahmad; Mohamad Yuzwan Yahya, Norsehah Bt Hj Abd Karim; Norazlin binti Ibrahim (2013-11-25)
    This paper is to report about a preliminary design and fabrication of a prototype spherical robot using microcontroller, accelerometer and gyro sensor. A spherical robot is a spherical shape controlled robot without arm ...
  • Optimization On Of Cutting Parameters (Turning) Using Taguchi Method For Nickel-Based Alloy 
    Teh Ewe Thong, Azri Hamim Abdul Aziz; Ihsan Bin Shahidan (2013-11-25)
    The setting of cutting parameters is out most important in any machining processes for qualitative and quantitative reasons. The examples of qualitative output in machining could be surface finish/roughness, dimensional ...
  • Design and Implementation of Tri-Star Wheel for Stairs Climbing Robot (Preliminary) 
    Siti Khadijah Ismail, Amir Sharizam Ismail; Wan Mohd Harfiz Wan Anang, Mohd Nasruddin Elyas; Farah Hana Mukhtar, Noor Hasyimah Abu Rahim (2013-11-25)
    This paper proposed a preliminary design and implementation tri-star wheels robot that can move and climb the stairs. This mobile robot control by PIC microcontroller and PS2 is used to control the movement of the ...
  • Temperature Control for Engineering Undergraduate Fuzzy Logic Labotary 
    Mohd Fadzil Abu Hassan, Yusman Yusof; Muhammad Sobri Ramli (2013-11-25)
    Teaching Fuzzy Logic to undergraduate engineering students can be a time consuming and expensive task. Lecture sessions cover the theoretical aspect of Fuzzy Logic and laboratory exercises allow the students to ...

Search DSpace


Advanced Search

Browse

My Account