Conference Paper: Recent submissions

  • Analytical Subdomain Model for Double-Stator Permanent Magnet Synchronous Machine 
    Ahmad, M.S.,; Ishak, D.,; Rezal, M.,; Leong, T.T.,; Jamil, M.K.M. (2023-11-21)
    This paper presents an analytical subdomain model for predicting the magnetic field distributions in three-phase double-stator permanent magnet synchronous machine (DS- PMSM) during open-circuit and on-load conditions. ...
  • Significance of Aircraft Maintenance Personnel’s Reaction Time During Physical Workload and Mental Workload 
    Abdul Ghani Abdul Samad ( UniKL MIAT ) (2023-10-30)
    The paper examines the significance of reaction time recorded by aircraft maintenance personnel whilst undertaking both physical and mental workload in an aircraft maintenance hangar setting. The workloads included surface ...
  • A Review on the Mental Workload and Physical Workload for Aircraft Maintenance Personnel 
    Abdul Ghani Abdul Samad (2023-10-30)
    This paper reviews the nature and differences of both mental workload and physical workload that exist in the maintenance working culture. From general point of view to aviation maintenance in specifics, it can be ascertained ...
  • Control of pH neutralization process using PLC-PID compact controller 
    Azavitra Zainal; Norhaliza Abdul Wahab; Mohd Ismail Yusof; (UniKL MITEC) (2023-10-04)
    This study focuses on controlling the pH neutralization process in the Palm Oil Mill Effluent (POME) pre-treatment process. The pH value is one of the parameters that need to be followed based on Standards A and B of the ...
  • Cutting Strategy of Polymer Composite Material for Aerospace Engineering Application 
    Abdul Sani, A.S; Zainuddin, A.Z.; Saharudin, M.S.; (UniKL MIDI) (Springer Science and Business Media Deutschland GmbH, 2022)
    Despite the popular use of hybrid fibers in polymer composite in aerospace applications, it comes with a price where it is expensive and has a complex process to produce. A new alternative method of using nanocomposite ...
  • Fabricated Germanium Doped Optical Fibres (FGDOF) for Electron Beams Dosimetry 
    Zabariah, Zakaria; Mohd Zahri, Abdul Aziz; Ha O, Ng Aik; Suppiah, Subapriya; Bradley, David Andrew; Noramaliza, Mohd Noor; UniKL BMI (2023-09-13)
    A new dosimeter, namely, Fabricated Germanium Doped Optical Fibres (FGDOF) is developed for electron beam dosimetry. The objectives were investigated the basic and advanced dosimetric characteristics of FGDOF in electron ...
  • ON-SITE ACOUSTIC QUALITY DISTURBANCE ON EDUCATION & COGNITION : A SYSTEMATIC REVIEW 
    Muhammad bin Azmi; Muhammad Amirul Ashraf bin Samsudina; Muhammad Qusyairi bin Muhammad Amin; Ibnu Susanto Joyosemito; Ishamuddin bin Mustapha; (UniKL MITEC) (2023-09-10)
    Reverberation or Echo can disrupt desired sound conditions in a specific location, adversely affecting educational activities and cognitive processes of individuals present in that environment. It can impede learning, ...
  • Application of Information Technology in Teaching Business English Course 
    Chen, J.; UniKL BiS (Institute of Electrical and Electronics Engineers Inc., 2022-02-12)
    The teaching objective of business English is not only to strengthen students' English proficiency level but also to train students' practical ability. Traditional teaching has many problems, such as emphasizing theory ...
  • Web 3.0 Adoption Behavior: PLS-SEM and Sentiment Analysis 
    Hizam, S.M.; Ahmed, W.; Akter, H.; Sentosa, I.; Masrek, M.N.; UniKL BiS (CEUR-WS, 2022-07-06)
    Web 3.0 is considered as future of Internet where decentralization, user personalization and privacy protection would be the main aspects of Internet. Aim of this research work is to elucidate the adoption behavior of Web ...
  • Modeling and Analyzing of Photovoltaic Solar Power Systems using PVsyst 
    Nurul Afiqah Shamsul; Mohd Azraie Mohd Azmi; Muhammad Isyraq Azaman; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., 2022-09-26)
    Malaysia’s demand for renewable energy-focused solar has skyrocketed. The requirement to estimate the resource’s potential will undoubtedly be beneficial. Understanding the possibilities of these energy sources can assist ...
  • Mobile Flood Detector Alert System 
    Mohd Zaki Ayob; Muhammad Syarifuddin A Rahim; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., 2022-09-26)
    Flash floods are devastating to all, especially in lowland regions. Information relay is very important in flood mitigation. Typical solutions in relaying flood information are statically built near bridges or along ...
  • Measurement of Air Conditioning and Mechanical Ventilation Command Temperature to Control the Environment of Smart Building 
    Aziz, Miqdad; Kamarul Azman, Muhammad Haziq; Abdul Kadir, Kushsairy; Vijyakumar, Kanendra; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., 2022-09-26)
    Air conditioning based on the Air-Conditioning and Mechanical Ventilation (ACMV) principle is widely used in buildings constructed in tropical areas. The user activates this system by specifying the desired temperature, ...
  • Haze Attenuation Rate Measurement and Analysis in Malaysia for the Range of 24 GHz to 30 GHz 
    Siti Fatimah Nordin; Zuhanis Mansor; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., 2022-09-26)
    Haze is a frequent atmospheric phenomenon in many countries, particularly in Asia. As haze is mainly composed of dust and soot, there is a high possibility that haze particles are caused by millimetre wave attenuation. ...
  • Uncertainty Analysis in Building Energy Measurement with a Case Study 
    Dezfouli, Mohammad Mehdi Salehi; Kushsairy Abdul Kadir; Kamaruzzaman Sopian; Dehghani-Sanij, A. R.; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., 2022)
    Due to the inherent uncertainty of a variety of elements impacting building energy use, uncertainty analysis in building energy assessment has emerged as an active study area. This study aims to assess the uncertainty of ...
  • The Covid-19 Total Lockdown Effects on Grid Energy Demand: A Malaysia Experience 
    Ahmad Syukri Mohamad; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., 2022)
    The Covid-19 disease is a highly contagious disease that causes respiratory tracts and lung infections, where some of the cases can lead to fatalities. Malaysia recorded the first Covid-19 case on January 25th, 2020. ...
  • Respirator with Air Blower and Air Quality Detector 
    Muhammad Abdul Hakiim Rahman; Ahmed Elsheikh, Elsheikh Mohamed; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., )
    This work is motivated by the challenges faced during the COVID-19 pandemic. Effective protection from the virus is needed. Masks is one way to protect from the virus. To support the efforots to control the spread of ...
  • Prototype Development of an IoT Health Monitoring Device for Elderly Patient 
    Nurul Atiqah Hasman; Siti Marwangi Mohamad Maharum; Izanoordina Ahmad; Zuhanis Mansor; UniKL BMI (Institute of Electrical and Electronics Engineers Inc., )
    In hospitals or elderly care centres, nurses and physicians routinely round on each patient to review the their recovery progress and plan the patient's care for the day. However, frequent rounds throughout the day are ...
  • Terms and Condition of Services (T & C) for Drop Trailer Method (DTM) of Haulage Industry in Malaysia 
    Mazlan Md Zahid; Syazwa Nabila Mohd Raidzuan; Mustakim Melan; Rohafiz Sabar; Pichit Prapinit; Kasypi Mokhtar; (UniKL MITEC) (2023-07-16)
    Haulage Industry has implemented the Terms and Condition (T & C) of services on drop trailer method (DTM) for prime movers and trailers. Haulage tariff is the condition of service used to charge for their operations and ...
  • Selection of Lean Tools in Manufacturing Company towards Productivity Using AHP Method 
    Ahmad Nur Aizat Ahmad; Md Fauzi Ahmad; Norhadilah Abdul Hamid; Rumaizah Ruslan; Lee Tee Chuan; Gusman Nawanir; Adnan Bakri; Mustaqqim Abdul Rahim; (UniKL MITEC) (2023-07-16)
    Lean tools is known as philosophy, a method and management skills to increase productivity by eliminating the waste in manufacturing environment. Every sector in manufacturing implementing lean tools since it applicable. ...
  • Innovative in 3D Printing: Design And Development of A User-Friendly Wheelchair 
    Ahmad Nur Aizat Ahmad; Md Fauzi Ahmad; Norhadilah Abdul Hamid; Lee Tee Chuan; Mohd Kamarul Irwan Abdul Rahim; Gusman Nawanir; Adnan Bakri; Mustaqqim Abdul Rahim; (UniKL MITEC) (2023-07-16)
    This paper is presented a new design of innovative wheelchair which contributed to health care by using SolidWorks software and 3D printing. The combination function of wheelchair can help the user as a walking aid or the ...

Search DSpace


Advanced Search

Browse

My Account