Final Year Project - UniKL MIMET: Recent submissions

  • SOLUTION OF NEWTONIAN WITH SHALLOW WATER EQUATION MODELLING 
    MUHAMAD HILMI BIN ZAMRI (2015-09-10)
    For better understanding of tsunami phenomenon, a Lattice Boltzmann Method that is proposed as the most modern and accurate computational Fluid dynamic method will be developed and produced for non-Newtonian tsunami water. ...
  • THE COMPARATIVE STUDY OF MECHANICAL PROPERTIES FOR FIBREGLASS REINFORCED PLASTICS (FRP) BY USING VARIOUS OF COMPOSITE ENGINEERING RESIN 
    MUHD AZRI RIFDI BIN ABDULLAH (2015-09-10)
    The aim of this research is to compare the result of three common testing for the fabrication of fibreglass using conventional hand laminating. The products were fabricated and tested using tensile testing, flexural testing ...
  • SIMULATION OF SPEED, RESISTANCE AND STABILITY OF F1 RC BOAT TYPE A 
    MUHAMMAD ARIFFIN BIN ABDUL HALIM (2015-09-10)
    The present study is comprised explicitly regarding the comparison simulation of boat models were developed from 3D scanning process of an actual F1 RC boat, whereas "stepped hull" model was derived from an actual fast ...
  • FEASIBILITY STUDY OF COST ESTIMATION OF MEGA OFFSHORE STRUCTURE AT DESIGN STAGE 
    MOHAMAD ADIB ASHRAF BIN ISHAK (2015-09-10)
    The Mega Offshore Structure Design is an independent floating static system designed. If the probable cost of building the mega offshore structure is found at the beginning stage, the forecasting to supply resources will ...
  • BOAT MODEL-DIRECT METHANOL FUEL CELL(TRAINING KIT) 
    NUR AZIRA BINTI ABD GANI (2015-09-10)
    The design, fabrication and performance of Direct Methanol Fuel Cell (DMFC) either it works in order replace the existing power sources for the prototype of the boat as training purpose in this research. In this study found ...
  • DESIGN ANALYSIS OF HYBRID FIBRE ALUMINIUM LAMINATE 
    AMIR NABIL B KHALID (2015-09-10)
    Hybrid Fibre Aluminium Laminate is new and an advance composite material .To introduce new light weight with high strength were the main purpose of this research. The hybrid material will consist of three main composition ...
  • PERFORMANCE OF PULAU PANGKOR FIBREGLASS FISHING BOAT : PRELIMINARY DESIGN AND ANALYSIS 
    NOR SHAHIRA BINTI MD MUSA (2015-09-09)
    Fiberglass commonly known in the business as fiber reinforced plastic (FRP) or glass reinforced plastic (GRP) has been used in boat building for over 60 years. In that time, vessels of various categories have been built ...
  • DESIGN AND CONSTRUCTION OF 8 METER BOAT TRAILER (MAIN BODY) 
    MUHAMMAD BIN ABDULL LATIFF; MUHAMMAD IRFAN BIN ISMAIL HASHIM; UNIKL MIMET (2015-06-24)
    During the Final Year Project, we have been assigned for boat trailer that was conducted by Mr. Abdul Aziz Bin Abdul Rahim. This project consist four people to complete this project, we have divide into two group. One group ...
  • DESIGN AND CONSTRUCTION OF 8 METER BOAT TRAILER (OUTFITTING) 
    MUHAMMAD ADIB HANIFF BIN MOHAR; CHE MUHAMAD SAFWAN BIN CHE ABDU SAUPI; UNIKL MIMET (2015-06-24)
    During the Final Year Project, we have been assigned for boat trailer that was conducted by Mr. Abdul Aziz Bin Abdul Rahim. This project consist four people to complete this project, we have divide into two group. One group ...
  • DRAGONBOAT SIMULATOR (WAVE'S POWER MEASUREMENT DEVICE) 
    AHMAD RASYDAN BIN AMIN; MUHAMMAD AMER ASYRAF BIN YUSOFF; UNIKL MIMET (2015-06-24)
    The aim of this study is to design and construction of wave’s power measurement device for measure dragon boat athlete when they rowing in tank. In this will include the conventional mechanical process method for this ...
  • MARINE MULTIFUNCTION ARM FOR BOAT LIFTER SPREADER 
    SAIFUL NIZAM BIN ROSLAN; SYLLVESTER SAGOH AK BANDANG; MUHD AIMAN ARIF BIN ZAINAL; UNIKL MIMET (2015-06-24)
    These report describe the overview of the types, how, and outcome of works done by the students which formed the Final Year Project for Diploma Engineering Ship Construction and Maintenance. The study is related to the ...
  • THE DEVELOPMENT OF MARINE MULTIFUNCTION OF BOAT LIFTER SPREADER 
    MOHAMAD NAZRIN BIN NAZLAN; MUHAMMAD HAZIM BAHIIJ BIN HAIRIL BASAR; MUHAMAD NUR BASIR BIN ISMAIL; UNIKL MIMET (2015-06-24)
    The main purpose of marine multifunction of boat lifter spreader is to transfer the boat from point to point. It much easy to use, because the spreader can be attach to forklift or cranes. Shackle and sling belt been use ...
  • DEVELOPMENT OF 24 FEET FISHING BOAT 
    MUHAMAD AIZAT BIN ARAZAMI; MUHAMMAD IFZHAN BIN ABDUL HALIM ZAKI; MUHAMMAD SYAFIQ BIN AZIZAN; UNIKL MIMET (2015-06-24)
    Boat repair and maintenance are essential. As the boat go ages, its need a proper repair and maintenance. A small problem can occur as a major problem if the matter taken lightly. This project is focused on the processes ...
  • A STUDY ON AGRUCULTURAL WASTE FOR FILTERING OIL IN BILGE SYSTEM 
    AHMAD RITHUAN BIN AHMAD ASRI; SRI MUHAMMAD AFHAM BIN ZAINAL; ARVINTH A/L TANGGABELLO; UNIKL MIMET (2015-06-24)
    The International Maritime Organization (IMO) has ammended a regulation for preventing pollution by oil from ships which are contained in Annex I of the International Convention for the Prevention of Pollution from Ships, ...
  • DEVELOPMENT OF RECREATIONAL ALUMINIUM PONTOON 
    MUHAMMAD EZZANI BIN ZULKIFLI; MOHD FAREEZ BIN MD. RADZI; MUHAMMAD NAJMI BIN ZAINAL; UNIKL MIMET (2015-06-24)
    Pontoon is a flotation device with buoyancy sufficient to float itself as well as a heavy load. A pontoon boat is a flattish boat that relies on pontoons to float. Pontoons may be used on boats, rafts, barges, docks, air ...
  • DEVELOPMENT OF 19 FEET RESCUE BOAT, MOULD CONSTRUCTION 
    AHMAD BAZLI BIN AZIZ; SOFIAH BINTI YAACOB; PUTERI NUR ATIQAH BINTI NASARUDDIN; UNIKL MIMET (2015-06-24)
    Constructing new mould from an existing boat is no longer a new in boatbuilding process. By repairing the existing boat that used to be a rescue boat for KL PAUS, follow up with the hand lay-up operation, the new mould can ...
  • FABRICATION OF ENGINE COMPARTMENT MODULE BASED ON IACS REQUIREMENT 47 
    SUTHA GANESHA CHANDRAN; MUHAMMAD AISAR BIN SHAROM; ISMAIL BIN ZAINAL (2015-06-24)
    This semester Final Year Project makes a different project from previous semester. These projects get ideas from lecturer combined with student and provide innovation. For this semester student must do a new design. Every ...
  • ALUMINIUM 6063 MICROSTRUCTURE ANALYSIS OF FRICTION STIR WELDED PIPE BUTT JOINT IN DIFFERENT TRAVEL SPEED 
    MUHAMMAD JAI BIN AZALI@AZMAN; MUHAMMAD MUNIIM BIN MOHD TAHER; UNIKL MIMET (2015-06-24)
    This research presents an investigation of research objective to determine the variation of grain structure due to vary travel speed input. In this experiment, the type of material conducted is aluminum AA6063. This type ...
  • MICROSTRUCTURE ANALYSIS OF FRICTION STIR WELDING OF PIPE BUTT JOINT IN DIFFERENT ROTATION SPEED 
    NUR ZURAIN BINTI ZAINAL; SITI SHARIFAH BINTI OMAR; UNIKL MIMET (2015-06-24)
    FSW was first invented by the TWI in England as the new invention of innovation of replacing the old method of welding. The research is carried out to analyse the microstructure of the pipe butt joint in the variation of ...
  • A DESIGN OF RECREATIONAL ALUMINIUM PONTOON 
    MOHAMAD SHAZRUL ADLY BIN MOHD HISHAMMUDDIN; DZULHAIKAL BIN DZULHASDI; MOHD NAJWAN BIN AHMAD; UNIKL MIMET (2015-06-24)
    Pontoon is a floating device which is float on its own. Usually pontoon are being place in the calm water. In this aluminium recreational pontoon project there are two groups which is construction team and designing team. ...

Search DSpace


Advanced Search

Browse

My Account