• FABRICATION OF MULTIFUNCTION PORTABLE WAGON WITH SCISSOR LIFTER 

  ZULFAQAR BIN RAZAMAN (56102121268) (2024-06-12)

  This project focuses on the development of a multifunctional portable wagon with a scissor lifter, aiming to address the limitations of conventional material handling equipment in terms of ergonomics and portability. ...
• THE INFLUENCE OF MARINE INVERTEBRATE ‘CORAL’ AS ANTIFOULING ON STEEL MATERIAL SURFACE 

  SYED MAHLIL BIN SYED MAHMUD SHAH KAMAL (56215120209) (2024-06-12)

  The growth of the shipping sector and its pursuit of maximum efficiency are the main concerns of our field. A ship is a substantial boat used for carrying cargo or people through the world's oceans and other appropriately ...
• DEVELOPMENT OF MARINE STEM. OF T.V.E.T MODULE FOR SECONDARY STUDENT 

  SONIYAH ANNAVI (56102221002) (2024-06-12)

  This study looks at the effects of STEM education programs on secondary school students' involvement and academic achievement. With the use of surveys and interviews, the study uses a mixed-methods approach to gather ...
• DESIGN OF MULTIFUNCTION PORTABLE WAGON WITH SCISSORS LIFTING 

  NURAINA MAISARAH BINTI KHAIRUL ANUAR (56101121115) (2024-06-12)

  This paper introduces the design and development of a multifunctional portable wagon equipped with a novel scissors lifting mechanism. The portable wagon is designed to address the diverse needs of users in various ...
• INVESTIGATION ON THE PERFORMANCE OF CONTROL SYSTEM & PNEUMATIC CONTROL VALVE (GLOBE) FOR COMPRESS AIR SYSTEM 

  NUR SYAFIQAH IZREEN BINTI SALAHUDDIN (56217120134) (2024-06-12)
• DEVELOPMENT OF FOSTER WHEELER TYPE ESD-I BOILER 

  NUR KHIDYAH BINTI MOHD SABRI (56103121003) (2024-06-12)

  The objective of this project is to develop a teaching aid, which is a replica of the Foster Wheeler-type ESD-I boiler. This model will help students gain a thorough understanding of steam flows and the complex control ...
• DEVELOPMENT OF SPILL AND MAKE-UP LINE IN CLOSED FEED SYSTEM MODEL FOR TEACHING AID 

  NOOR HAFIZI HASANI BIN NOORASRUL HASANI (55104121002) (2024-06-12)

  This research endeavors to address critical challenges in engineering education by focusing on the development of a comprehensive teaching aid model centered on Spill and Make-up Line in Closed Feed System. The objectives ...
• DESIGN AND DEVELOPMENT OF 3D-PRINTED UNMANNED SURFACE VESSEL MODEL LAMINATED WITH FIBRE REINFORCED PLASTIC (FRP) 

  MUHAMMAD SHAHMI BIN SHAMSOL (56215120228) (2024-06-12)

  This research project aims to design and fabricate a 3D printed unmanned surface vessel model, incorporating Fibre Reinforced Plastic (FRP) for improved structural integrity. The methodology, outlined in a step-by-step ...
• A STUDY ON THE INCREASING CONGESTION FACTOR OF DRY BULK IN PORT KLANG 

  MUHAMMAD SHAHIR BIN MOHD TAUFEK (56212221018) (2024-06-12)

  The maritime industry is essential to international trade, and efficient ports are essential to the efficient handling of cargo. To determine the underlying factors and evaluate the implications of the increasing congestion ...
• BOLLARD PULL METER PROTOTYPE USING ARDUINO-BASED EQUIPMENT FOR DRAGON BOATERS 

  MUHAMMAD NUR AZIIM BIN YUSOFF (56217120162) (2024-06-12)

  This final year project explores the feasibility of implementing sports science principles in water sports, focusing on the UniKL MIMET Dragonboat team. The main objective is to study bollard pull, a measurement used to ...

• FABRICATION OF MULTIFUNCTION PORTABLE WAGON WITH SCISSOR LIFTER 

  ZULFAQAR BIN RAZAMAN (56102121268) (2024-06-12)

  This project focuses on the development of a multifunctional portable wagon with a scissor lifter, aiming to address the limitations of conventional material handling equipment in terms of ergonomics and portability. ...
• THE INFLUENCE OF MARINE INVERTEBRATE ‘CORAL’ AS ANTIFOULING ON STEEL MATERIAL SURFACE 

  SYED MAHLIL BIN SYED MAHMUD SHAH KAMAL (56215120209) (2024-06-12)

  The growth of the shipping sector and its pursuit of maximum efficiency are the main concerns of our field. A ship is a substantial boat used for carrying cargo or people through the world's oceans and other appropriately ...
• DEVELOPMENT OF MARINE STEM. OF T.V.E.T MODULE FOR SECONDARY STUDENT 

  SONIYAH ANNAVI (56102221002) (2024-06-12)

  This study looks at the effects of STEM education programs on secondary school students' involvement and academic achievement. With the use of surveys and interviews, the study uses a mixed-methods approach to gather ...
• DESIGN OF MULTIFUNCTION PORTABLE WAGON WITH SCISSORS LIFTING 

  NURAINA MAISARAH BINTI KHAIRUL ANUAR (56101121115) (2024-06-12)

  This paper introduces the design and development of a multifunctional portable wagon equipped with a novel scissors lifting mechanism. The portable wagon is designed to address the diverse needs of users in various ...
• INVESTIGATION ON THE PERFORMANCE OF CONTROL SYSTEM & PNEUMATIC CONTROL VALVE (GLOBE) FOR COMPRESS AIR SYSTEM 

  NUR SYAFIQAH IZREEN BINTI SALAHUDDIN (56217120134) (2024-06-12)
• DEVELOPMENT OF FOSTER WHEELER TYPE ESD-I BOILER 

  NUR KHIDYAH BINTI MOHD SABRI (56103121003) (2024-06-12)

  The objective of this project is to develop a teaching aid, which is a replica of the Foster Wheeler-type ESD-I boiler. This model will help students gain a thorough understanding of steam flows and the complex control ...
• DEVELOPMENT OF SPILL AND MAKE-UP LINE IN CLOSED FEED SYSTEM MODEL FOR TEACHING AID 

  NOOR HAFIZI HASANI BIN NOORASRUL HASANI (55104121002) (2024-06-12)

  This research endeavors to address critical challenges in engineering education by focusing on the development of a comprehensive teaching aid model centered on Spill and Make-up Line in Closed Feed System. The objectives ...
• DESIGN AND DEVELOPMENT OF 3D-PRINTED UNMANNED SURFACE VESSEL MODEL LAMINATED WITH FIBRE REINFORCED PLASTIC (FRP) 

  MUHAMMAD SHAHMI BIN SHAMSOL (56215120228) (2024-06-12)

  This research project aims to design and fabricate a 3D printed unmanned surface vessel model, incorporating Fibre Reinforced Plastic (FRP) for improved structural integrity. The methodology, outlined in a step-by-step ...
• A STUDY ON THE INCREASING CONGESTION FACTOR OF DRY BULK IN PORT KLANG 

  MUHAMMAD SHAHIR BIN MOHD TAUFEK (56212221018) (2024-06-12)

  The maritime industry is essential to international trade, and efficient ports are essential to the efficient handling of cargo. To determine the underlying factors and evaluate the implications of the increasing congestion ...
• BOLLARD PULL METER PROTOTYPE USING ARDUINO-BASED EQUIPMENT FOR DRAGON BOATERS 

  MUHAMMAD NUR AZIIM BIN YUSOFF (56217120162) (2024-06-12)

  This final year project explores the feasibility of implementing sports science principles in water sports, focusing on the UniKL MIMET Dragonboat team. The main objective is to study bollard pull, a measurement used to ...
• ANALYSIS OF CAMERA-BASED CRACK DETECTION SYSTEM UNDER SHIP’S HULL DURING DRY DOCK 

  MUHAMMAD ISKANDAR BIN MOHAMED RADZUAN (56217120175) (2024-06-12)

  Significant technological breakthroughs in monitoring and maintenance are being made in the marine industry to guarantee the integrity and safety of vessels. The goal of this project is to design and develop a camera ...
• A SUSTAINABLE STRATEGY TO MARINE BIOFOULING PREVENTION: INVESTIGATING THE EFFECTIVENESS OF CORAL-BASED ANTIFOULING COATINGS ON ALUMINIUM SURFACES 

  MUHAMMAD IRFAN AUZAIE BIN MOHAMAD SHARIF (56215120204) (2024-06-12)

  The issue of marine biofouling presents a considerable obstacle to the marine sector and carries adverse ecological consequences. The marine ecosystem has been negatively impacted by toxic antifouling coatings, leading ...
• A DESIGN OF AN IMPROVISED CHAMBER FOR BENT-DUCT BUOY WAVE ENERGY DEVICE 

  MUHAMMAD IKHMAL BIN ROSLY (56215121349) (2024-06-12)

  Ocean wave energy is one of the most plentiful energy sources on the planet. In fact, it has demonstrated to be the most clean, renewable, and predictable energy, having the ability to compete with present nonrenewable ...
• A STUDY OF FLOATING OSCILLATING WATER COLUMN USING CFD SOFTWARE 

  MUHAMMAD HILMI ZHARFAN BIN YUSRI AZHAR (56215121335) (2024-06-12)

  An approach named Oscillating Water Column (OWC) uses wave energy to produce electricity. It functions by taking advantage of the pressure oscillation caused by waves in the OWC's opening mouth. A turbine positioned at ...
• FAILURE MODE AND EFFECT ANALYSIS (FMEA) FOR DIY 3D PRINTER 

  MUHAMMAD HAMIZAN SYAZWAN BIN MOHAMAD ZUBIR (56217120157) (2024-06-12)

  Failure Mode and Effects Analysis (FMEA) is a widely used tool for identifying potential failure modes in a system, evaluating their effects, and implementing measures to mitigate or eliminate them. In the case of a DIY ...
• COMPARATIVE STUDY OF CARGO BARGE STRUCTURAL DESIGN STANDARDS 

  MUHAMMAD FIRDAUS BIN MOHAMAD FADZIL (56215120186) (2024-06-12)

  A barge is typically a flat-bottomed vessel used for offshore activities as a bulk transporter, equipment supplies carrier, crane platform, and foundation for support housing. The barge considered in this paper is a deck ...
• ANALYSIS OF THE IMPACT OF OCEAN ACIDIFICATION ON MARINE ECOSYSTEMS IN MANJUNG RIVER 

  MUHAMMAD FIKRUDDEEN AL-ALAMI BIN MUSA (56217220043) (2024-06-12)

  This research project focuses on the complex interplay between ocean acidification and salinity within marine environments. The primary objective is to unravel the nuanced relationship between these two critical factors ...
• TO STUDY THE PERFORMANCE & EFFICIENCY OF THE CONTROL SYSTEM & CONTROL VALVE FOR TANK LEVEL 

  MUHAMMAD FAYYADH ISLAM BIN FADZLI (56217120180) (2024-06-12)
• COMPREHENSIVE MAINTENANCE AND REFURBISHMENT OF SAILING BOAT: OPTIMIZING SAILING BOAT PERFOMANCE THROUGH HULL CLEANING (AMIDSHIPS– STARBOARD SIDE) 

  MUHAMMAD FARIS BIN ALI (56103121108) (2024-06-12)

  This comprehensive study focuses on the maintenance and refurbishment of a sailing boat's hull, specifically targeting the amidship to port beam section, with the primary objective of optimizing sailing boat performance ...
• Comparative Study of Flow Analysis: Characteristics of Seawater T-Type Tees on Different Fillet Geometry 

  MUHAMMAD AYSAR BIN ROSLAN (50220120181) (2024-06-12)

View more