Recently added

THE EXPERIMENTAL STUDY OF FRICTION STIR WELDING ON AA5083 CORNER JOINT 5MM

FAIZAL ASHRAF BIN GHAZALI (2015-09-10)

In the recent welding technology, there have many method that can be used for joining of material of aluminium alloy, mild steel, high tensile steel and many other material. The generally used joining method in industry ...

EXPERIMENTAL STUDY ON TENSILE STRENGTH OF BUTT JOINTS FOR MILD STEEL WITH THICKNESS 6MM USING (GMAW)

MOHD FIKRY BIN MOHD RAMLI (2015-09-10)

In this study, the effects of various welding parameters on welding strength in low carbon steel JIS G 3101 SS400, welded by gas metal arc welding were investigated. The welding current, arc voltage are constant parameter ...

COMPARISON OF MAGNETIC PARTICLE INSPECTION (MPI) METHODS DUE TO THE EFFECTIVENESS IN INPECTION PROCESS

MUHAMMAD SYAHIR BIN SULAIMAN (2015-09-10)

The information provided in this research relates specifically to the Non- Destructive Testing (NDT), Magnetic Particle Inspection methods (MPI). The aim of this research is to compare the effectiveness of Magnetic Particle ...

DETERMINATION OF THE EFFECT ON PHYSICAL PROPERTIES FOR FIBERGLASS REINFORCED PLASTIC (FRP) BY USING VARIOUS TYPES OF CURING AGENT

AIZAMNI BIN MD NOOR (2015-09-10)

In this study to compare the result of three common testing for the fabrication of fibreglass using conventional hand laminating to produce the test samples with the rectangular shape. The products were fabricated and ...

A FEASIBILITY STUDY OF DUAL FUEL ENGINES USING DIESEL AND NATURAL GAS FOR SMALL SCALE FISHING BOAT

MUHAMAD FARHAD BIN MOHD YASIN (2015-09-10)

Natural gas known to be as better fuel in term of savings and emission compare to petrol. It has been used widely in land transportation and passenger ferry. This study discussed the method of fuel saving using combination ...

STUDY OF MECHANICAL PROPERTIES OF D2 STEEL ON CORROIOSN ENVIRONMENT

MOHD HAFIZUDDIN BIN ABDULLAH (2015-09-10)

An investigation was carried out to study the mechanical properties of D2 tool steel when the material exposed to corrosion environment up to 3 weeks. This study investigated the hardness strength and impact strength of ...

FEASIBILITY STUDY OF DIFFUSION WELDING ON STRUCTURAL STEEL AND CAST STEEL FOR MARINE APPLICATION

AKERELE JOSEPH MICHAEL (2015-09-10)

Steel is an alloy of iron and carbon that is widely used in construction and other applications because of its hardness and tensile strength. Steel is one of the most use metals in many fields due to its almost limitless ...

A STUDY OF POTENTIAL SEWAGE DUMPING AT LUMUT PORT

AHMAD HASANIL ANSORI BIN AHMAD FADZIL (2015-09-10)

This research is a study about the relationship between potential sewage dumping and the quality of water. The water on proposed location are examined base on several parameters which is; pH value, Biochemical Oxygen Demand ...

DEVELOPMENT OF LAB SCALE OSCILLATING WATER COLUMN DEVICE FOR COAST MALAYSIA

ADIB FARAHI BIN RAZALI (2015-09-10)

An Oscillating Water Column (OWC) is a shoreline device that obtaining power from ocean waves. OWC that act like piston and cylinder, as waves rise inside the chamber it replicate the action of piston, pushing a column of ...

THE STUDY OF MOSS CONTAINMENT SYSTEM

ADDRI REZA BIN ABD RAHMAN (2015-09-10)

As the world become pollutant each day, the need for clean energy is in demand to ensure a clean and sustainability future ahead. Clean energy such as the wind turbine and solar power although advancing still lack the ...

CASE STUDY OF 5.6 METER ALUMINIUM FISHING BOAT

DION PRIMA PUTRA BIN MARDONI (2015-09-10)

The aim of this study is to re-design the 5.6 meter Aluminium Fishing Boat. This case study will going to use reverse engineering to highlight the actual design and engineering analysis data by using Computer Aided Design ...

SEAKEEPING ANALYSIS BY USING DEVELOP COMPUTER PROGRAMME

AHMAD LUQMAN BIN NASRUDIN (2015-09-10)

This study concentrated on pitching motion analysis of a ship model at static condition, 0 m/s experiencing head seas in regular waves. The experiment is carried out at Universiti Teknologi Petronas by using one meter ship ...

STUDY ON THE PHYSICAL PROPERTIES OF COCONUT PEATNATURAL FIBRE COMPARE TO FRP USING DESTRUCTIVE PHYSICAL ANALYSIS

MOHD NAJMI BIN SHAARIN (2015-09-10)

The aim of this research is to compare the result of three common testing for the fabrication of fibreglass using conventional hand laminating. The products were fabricated and tested using tensile testing, flexural testing ...

ANALYSIS ON JACK-UP RIG PRELOADING CONDITION USING SEASAFESOFTWARE THE CASE OF UMW NAGA 4

MUHAMMAD AL-FATEH BIN SHAHROM (2015-09-10)

Preloading is one of the stages of jack-up rig move where the weight of the barge is increased by additional ballast water to drive the leg deeper into sea bottom so it will not penetrate further during operations afterward. ...

DEVELOPMENT OF WIND PUMP TECHNOLOGY USING CENTRIFUGAL PUM

MUHAMMAD WAFIY BIN ADNAN (2015-09-10)

Wind is often used as an energy source to operate pumps and supply water to livestock. Because of the large amount of water needed for crops, wind power is rarely used for irrigation. As larger or more efficient wind ...

STUDY THE MECHANICAL PROPERTIES AND MATERIAL COMPOSITION OF USED SHIP PROPELLER WHICH MANUFACTURED BY SAND CASTING

HISYAMUDDIN BIN RAHIM (2015-09-10)

Mechanical properties and material composition is important in the industry which has been apply to various company or facilities as their reference for the work that need to be done. There has been little research on ...

OPTIMIZATION OF PROCESS OF PHRAMETERS USING TAGUCHI METHOD ON DISSIMILAR GRADE OF ALUMINIUM FOR FSW

MUHAMAD IRFAN B MD NOOR (2015-09-10)

As commonly known, fusion welding of aluminum alloys is accompanied by the defect like porosity, solidification and crack. Friction stir welding offers a defect free weld joint since there is no melting process taking. ...

STABILITY AND POWERING ASSESMENT OF SMALL WOODEN FISHING BOAT IN KEDAH ACCORDING TO MARITIME SAFETY COMMITTEE MSC 8726 ANNEX 29

MUHAMMAD AMIR AIZAT BIN MOHD AZLI (2015-09-10)

The aim of research is to assess the stability and powering of small wooden fishing boat below 12 meter according to Maritime Safety Committee 87/26 Annex 29. The research is conducting in Kedah State. The result of ...

DESIGN ANALYSIS OF HYBRID FIBRE STEEL LAMINATES

AHMAD KHUSAIRI BIN KHAIRUL AZAM (2015-09-10)

One of the new and advanced composite materials, known as fibre–metal laminates consisting of bonded thin metal sheets and fibre layers is rapidly becoming a good substitute for metal structures, especially in aerospace ...

STABILITY & POWERING ASSESSEMENT FOR SMALL WOODEN FISHING BOATS IN PERAK ACCORDING TO MARITIME SAFETY COMITTE MSC 8726 ANNEX 29

MUHAMMAD FAEZ BIN ISZAHARI (2015-09-10)

This research comprising of three main activities, documentation of design trend of small wooden fishing boats in Perak, and stability and powering assessment of those small wooden fishing boats according to Maritime ...

Recently added

Final Year Project - UniKL MIMET: Recent submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account