Final Year Project - UniKL MIAT: Recent submissions

  • Composite Strength Analysis On Repair Technique Between Sanding Repair And Peel Off Repair 
    Nur Azalea Fadzillah Bt Mohamad Zaini (2014-05-28)
    The purpose of this research is to study the special technique used in composite repair. This special technique has been used in the composite industry for about two years, but the existence of it is unknown to many and only ...
  • Human Factor In Communication Among Pilot And Air Traffic Controller 
    Nurul Amirah Binti Jamaludin (2014-05-28)
    One of the problem facing the aviation industry is communication problem, especially miscommunication between aviation personnel. In the technological world of modern air travel,there’s a certain irony in the fact that ...
  • Utilizing Design For X Methodology To Reduce Human Error In Aircraft Maintenance 
    Rokiah Binti Abdullah (2014-05-28)
    The aim of this research is to improve a product design by using Design for X (DFX) Methodology which potentially reduced human error. The author closely highlights the three main objectives for this research. First is ...
  • Permeability Of Biofiber (Kenaf) Via Vacuum Infusion 
    Siti Fatihah Binti Suskri (2014-05-28)
    The purpose of this research is to study the permeability of Kenaf/epoxy composite and to compare the analytical and experimental of permeability. The problem that facing by manufacturer is, there are a lots of manufacturing ...
  • Linear And Thermal Stress Analysis Of Pressure Bulkhead Using Abaqus Cae 
    Noraini Binti Aris (2014-05-28)
    The intent of this project is to give an overview of the place of doing the research, understand the pressure bulkhead and apply it or demonstrate the analysis of the pressure bulkhead in Abaqus CAE software. Reducing ...
  • Air Exchanger Ventilation System With Cooling Feature 
    Ahmad Iqbal Bin Mohd Ansor (2014-05-28)
    This project provides information on ventilation system that will assist reader’s or student to understand about the the air condition that supply into room. The air moving towards room is called velocity which is that ...
  • Fire Resistance Of Natural Fibers 
    Mohd Syafiq Bin Abd Rahman (2014-05-28)
    Natural fiber is a widely used fiber nowadays in reinforcing composite structure. This is due to the awareness of environmental to the people and the fuel price issue since the synthetic fiber is more expensive than them. ...
  • Tensile Strength Experiment On Cone-To-Cone Product 
    Sharqawi Bin Mohd Shahirudin (2014-05-28)
    Firstly, the idea that I can to make my study on tensile strength is from my supervisor, Sir Yusri Dahdi. The title of the research is Tensile Strength Experiment On Cone-To-Cone. It is because, my supervisor as a Turbine ...
  • Performance & Emission Of Hydrogen Fed I.C. Engine 
    Arun Kumar Devaraj (2014-05-28)
    The Environmental apprehensions and regulations to reduce greenhouse gas emission and depletion and fluctuation of fossil fuel price have inspired research on alternative fuels. This project is carried out with the aim to ...
  • Bird Deterrent System: Motion Detection - Ultrasonic Sensor 
    Nik Mohd Fajarul Ishaq Bin Nik Sinluddin (2014-05-28)
    The research for BIRD DETERRENT SYSTEM: MOTION DETECTION - ULTRASONIC SENSOR is a Final Year Honors’ thesis being developed from the Bachelor Of Aircraft Engineering Technology (Hons) Mechanical of Universiti Kuala Lumpur, ...
  • Thermoacoustic Refrigerator Chamber For Noise Induced Converter (Ni-Con 
    Abdul Manan Bin Mohamad Satar (2014-05-28)
    The study focuses on an interesting theory related to the principle of sound and energy transfer that are someday will become another type of way to get thermal difference between hot and cold energy without using a ...
  • Bio-Composite Body Armour Vest (Shooting) 
    Mohamad Aizuddin Bin Mohd Azam (2014-05-28)
    Body armour vest is a protection gear wear by arm forces to protect them against gun fire. The development of armour vest has been long since late middle ages where knights and warrior wear steel clothing to protect them ...
  • Improving Maintainability Of Compressor Rotor Blade By Prediction Analysis 
    Mohd Afiq Afnan Bin Mohd Khalid (2014-05-28)
    The purpose of this research is to utilising existed methodology known as Maintainability Prediction in Military Handbook (MIL-HDBK 472) to calculate maintenance time of turbine engine compressor section in accordance with ...
  • Replica Test On Turbine Blades 
    Mohamad Zainolabidin Bin Aptu (2013-11-26)
    The title of this research is ‘Replication Test on Turbine Blade’. This research will focus on metallurgical evaluation of microstructure to be done on aircraft component which is turbine blade. Failure analysis, one of ...
  • Economic Analysis On Removal Spoiler On Boeing 727 
    Mohd Yusouf Bin Nordin (2013-11-26)
    The purpose of this research is to propose another step to do the maintainability prediction for an aircraft component. In this research, the author shows how to determine the quantity of the difficulties of the aircraft ...
  • Basic Hydraulic System Mock-Up 
    Hishamudin Bin Saimi , Muhammad Nur Helmi Bin Basiran (2013-10-24)
    The Basic hydraulic system is the system that uses engines to move the landing gear, flight control, wheel and brakes and wing flap. The system located in the bottom part of fuselage, acting as a system that drive almost ...
  • Fuel Drum Lifter 
    Syed Azrin Bin Syed Ayub , Mohd Syamil Bin Rozman (2013-10-24)
    Fuel drum lifter is essential in order to move a heavy drum from one place to another. The load of a 55 gallon fuel drum would be too much too move without the aid of any mechanism. Therefore, we created the fuel drum ...
  • Cessna 182 Storage And Preservation Via Corrosion Control 
    Mohd Shahir Bin Saari , Ahmad Hanafi Bin Saharudin (2013-10-24)
    Alhamdulillah, we finally manage to get the title for our final year project based on the discussion with our supervisor, Mr. Md. Khairul Amiza bin Md. Hairuddin, which is to study about Cessna 182 storage and preservation ...
  • Flight Control Mockup 
    Luqman Nurhakim Bin Rosmadi , Muhammad Asyraf Bin Ahmad Khairi (2013-10-24)
    The main objective of constructing this project is to create a training aid that will be useful for the learning process specifically for ‘Flight Control’ learning process. This project will help to improve UniKL MIAT’s ...
  • Maintenance Time Prediction For Aircraft Turbine Engine Components; Removal And Replacement 
    Syaza Nurnadia Binti Abdul Sani (2013-10-24)
    The purpose of this research is to verify maintenance prediction time of aircraft turbine engine components on Removal and Replace (R&R) concept. This is carry out by applying Procedure III as stated and published in ...

Search DSpace


Advanced Search

Browse

My Account