• The Development Of A Low Cost UAV Antenna Tracker 

  Kamal Afiq Bin Kamal Bahrin; Ahmad Hafizi Bin Muhammad (2015-09-23)

  A UAV Antenna Tracker System is a system that tracks where in the sky or where on the ground an aircraft is. There are multiple methods for an antenna tracker to do this. One is to use RADAR to find the aircraft and feed ...
• Designing Motor Assisted Mechanism To The Overhead Stowage Bins In Aircraft 

  Wan Muhammad Mustaqim Bin Wan Azman (2015-09-23)

  The project is focused on designing a motor assisted mechanism for use in the existing passenger’s overhead stowage compartment in commercial aircraft. Purpose of this project is to design and build a mechanism on the ...
• Fiber Properties: Strength From The Arrangement 

  Mohd Izzat Bin Othman (2015-09-21)

  In this project , a selected type of bamboo will be tested to determine which orientation have better strength. Then, the specimen is prepared according to American Society for Testing and Material (ASTM) test standards ...
• Effect Of Treated Kapok Fiber On Aviation Oils Absorbency 

  Mohd Ainuddin Bin Khairuddin (2015-09-21)

  This project analyse the oil absorbency effect of treatment on kapok fiber with different types of aviation oil. Kapok fiber is a naturally renewable material with large lumen and hydrophobic characteristics, which enables ...
• Describing Sinusodial Wave (Sine) In 3 And 4 Parameters 

  Abdullah Azam Bin Jaafar (2015-09-21)

  The research of this purpose is to define the sinusoidal wave, or popularly known as sine wave, in 3 and 4 parameters to be used in analyzing the data gained from a series of test performed on aluminum 5056 and fiberglass. ...
• A Mock-Up Of A Simple Wireless Energy Transfer Application 

  Muhammad Syafiq Bin Bahari; Muhammad Hafiz Bin Kamarul Bahrin (2015-09-21)

  Hands on mock-up that shows the application of the wireless power transfer would enhance the aviation students understanding on the principle of mutual inductance. This is due to the fact that visual learning would give a ...
• Experimental Assessment Of High Velocity Impact Damage On Aerospace Honeycomb Composite Materials 

  Ahmad Fadhli Rahimi Bin Nubli (2015-09-21)

  Determining how a material responds to ballistic impact is important for designing improved penetration-resistant structures. Historically, the majority of research into the effects of ballistic impact has been for curvature ...
• Study Of Comparison Of Bending Strength Between Fiber Glass, Carbon Fiber And Hybrid Composite 

  Amirul Hafizuddin Bin Mustapah (2015-09-18)

  This study focus on comparison of bending strength between fiber glass, carbon fiber and hybrid composite. Research are done regarding the materials used in this study. Pure fibers are going through lamination process which ...
• Factor Affecting Performance That Contributed To Human Error Review On Maintenance Crew Perspective 

  Aidil Adlee Bin Che Mee (2015-09-18)

  As the technology of an aircraft becoming more reliable, human has been more important causal role in aviation incident tragedy. Many of the earlier human factor lesson apparently had to be learn in hard way. In 1940, it ...
• The Design And Analysis Of Tapered And Untapered Blades Of Horizontal Wind Turbine 

  Fatin Fatihah Binti Sharman (2015-09-18)

  To achieve the highest extraction of the wind energy, a high efficiency of the wind turbine is needed. There are difference of efficiency between horizontal axis and vertical axis wind turbine. In this paper an attempt is ...

• The Development Of A Low Cost UAV Antenna Tracker 

  Kamal Afiq Bin Kamal Bahrin; Ahmad Hafizi Bin Muhammad (2015-09-23)

  A UAV Antenna Tracker System is a system that tracks where in the sky or where on the ground an aircraft is. There are multiple methods for an antenna tracker to do this. One is to use RADAR to find the aircraft and feed ...
• Designing Motor Assisted Mechanism To The Overhead Stowage Bins In Aircraft 

  Wan Muhammad Mustaqim Bin Wan Azman (2015-09-23)

  The project is focused on designing a motor assisted mechanism for use in the existing passenger’s overhead stowage compartment in commercial aircraft. Purpose of this project is to design and build a mechanism on the ...
• Fiber Properties: Strength From The Arrangement 

  Mohd Izzat Bin Othman (2015-09-21)

  In this project , a selected type of bamboo will be tested to determine which orientation have better strength. Then, the specimen is prepared according to American Society for Testing and Material (ASTM) test standards ...
• Effect Of Treated Kapok Fiber On Aviation Oils Absorbency 

  Mohd Ainuddin Bin Khairuddin (2015-09-21)

  This project analyse the oil absorbency effect of treatment on kapok fiber with different types of aviation oil. Kapok fiber is a naturally renewable material with large lumen and hydrophobic characteristics, which enables ...
• Describing Sinusodial Wave (Sine) In 3 And 4 Parameters 

  Abdullah Azam Bin Jaafar (2015-09-21)

  The research of this purpose is to define the sinusoidal wave, or popularly known as sine wave, in 3 and 4 parameters to be used in analyzing the data gained from a series of test performed on aluminum 5056 and fiberglass. ...
• A Mock-Up Of A Simple Wireless Energy Transfer Application 

  Muhammad Syafiq Bin Bahari; Muhammad Hafiz Bin Kamarul Bahrin (2015-09-21)

  Hands on mock-up that shows the application of the wireless power transfer would enhance the aviation students understanding on the principle of mutual inductance. This is due to the fact that visual learning would give a ...
• Experimental Assessment Of High Velocity Impact Damage On Aerospace Honeycomb Composite Materials 

  Ahmad Fadhli Rahimi Bin Nubli (2015-09-21)

  Determining how a material responds to ballistic impact is important for designing improved penetration-resistant structures. Historically, the majority of research into the effects of ballistic impact has been for curvature ...
• Study Of Comparison Of Bending Strength Between Fiber Glass, Carbon Fiber And Hybrid Composite 

  Amirul Hafizuddin Bin Mustapah (2015-09-18)

  This study focus on comparison of bending strength between fiber glass, carbon fiber and hybrid composite. Research are done regarding the materials used in this study. Pure fibers are going through lamination process which ...
• Factor Affecting Performance That Contributed To Human Error Review On Maintenance Crew Perspective 

  Aidil Adlee Bin Che Mee (2015-09-18)

  As the technology of an aircraft becoming more reliable, human has been more important causal role in aviation incident tragedy. Many of the earlier human factor lesson apparently had to be learn in hard way. In 1940, it ...
• The Design And Analysis Of Tapered And Untapered Blades Of Horizontal Wind Turbine 

  Fatin Fatihah Binti Sharman (2015-09-18)

  To achieve the highest extraction of the wind energy, a high efficiency of the wind turbine is needed. There are difference of efficiency between horizontal axis and vertical axis wind turbine. In this paper an attempt is ...
• Optimizing Lift By Different Number Of Spoke On Rotating Cylinder By Using CFD 

  Ahmad Mustafa Bin Abd Rahman (2015-09-18)

  Nowadays, almost all aircraft design must be design to have the capability to produce high lift to drag ratio especially during the take-off to reduce drag and at the same time will increase the lift. Normally people would ...
• The Capability Of Membrane Tube Infusion In Vacuum Infusion Process For Non Structural Aerospace Component 

  Amir Farhan Bin Mohd Himsah (2015-09-18)

  The use of Vacuum Infusion Process (VIP) in the past years has proven that it is one of the best method in producing composites. It involves a mold with a reinforcement and sealed with vacuum tubing around it. The purpose ...
• Comparison Of Strength Of Laminated Wooden Propeller Between Different Types Of Wood With Same Types Of Wood 

  Mohamad Faizzudin Bin Razali (2015-09-18)

  The idea of this project research was originally come out from my discussion with my supervisor, Mr. Sahid Bin Ahmad and also my co-supervisor, Dr. Malek and it is done by my understanding through my studies about laminated ...
• Tensile Strength Evaluation Of Aluminium Sheet Metal Between Unrepaired And Repaired Sheet Using Numerical Analysis 

  Alif Imran Bin Burhanuddin (2015-09-18)
• Technical And Financial Analysis Of Wooden Propeller Ceiling Fan 

  Mohamed Zulfakar Jafney Bin Zulkfli (2015-09-18)
• Analysis Of Lift Generated By The Different Angle Of Swept Of A Wing 

  Alif Rashrique Azras Bin Abdul Rasek (2015-09-18)

  The purpose of this project mainly is to analysis the lift generated within different swept wing angle in subsonic flight. Wing is the vital part in an aircraft which the function is to produce lift so that the aircraft ...
• Small/Light Aircraft Tracking System Based On The Technology Of Automatic Packet Reporting System (APRS) 

  Adam Sharez Azahari (2015-09-18)

  The Automatic Position Reporting System (APRS) is a well-established packet communication protocol that offers users a graphical position display system and a peer-to-peer textual message service. APRS is used in temporary ...
• Three Point Bending Test Analysis Of Composite Drain Grating 

  Izzat Shahir Bin Salleh (2015-09-18)

  The purpose of this study is compare the characteristic of composite and metal which is fibers and steel. In this research, the report briefly explained about the type of fiber which is made to be a composite. Comparison ...
• Characterize Wave Of Sinusodial Sine Wave In 3 And 4 Parameter 

  Ahmad Kamil Izzudin Bin Idris (2015-09-18)

  The purpose of this study is to analyse, understand and compare the vibration properties of two common aviation structural materials, which are aluminium and fibre glass. Aluminium and fibre glass have some common ...
• Analysing The Efficiency Of Different Wingtip Shapes 

  Nurul Amirah Binti Kamarudin (2015-09-18)

  As aircraft flying, a lot of lift needed to ensure maximum thrust can be generated. However as lift increase, induced drag also will increase. One of the problems due to drag usually happen at the wing tip. Vortices will ...

View more