Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMohamad Asmidzam Ahamat-
dc.contributor.authorMohd Firdaus Beludtu-
dc.contributor.authorRazali Abidin- MFI)-
dc.identifier.citationJournal of Science & Engineering Technology JSET Vol: 02 No: 02en_US
dc.descriptionFull text also available at JSET is open access journal published by Universiti Kuala Lumpur Publishingen_US
dc.description.abstractThis paper presents the use of a pair of vortex generators to increase the heat transfer coefficient in laminar and turbulent flow inside a circular pipe. A pair of vortex generator with a height of 6 mm and angle of attack of 25o inside a 12 mm diameter pipe. The flow pattern inside the pipe was visualized using dye injection method for the Reynolds number lower than 2100, to ensure the vortex generator produced turbulent flow. Then, the improvement on heat transfer enhancement of this vortex generator was evaluated through experiment. For the flow with Reynolds number less than 2000, the increase in heat transfer coefficient is 10 %. Tests with Reynolds number higher than 5000 did not yielded a conclusive result due to limitation on the heat transfer coefficient on the outer surface of pipe. It is expected that the vortex generator presented in this paper could be used to enhance heat transfer performance in thermoelectric heat pump system.en_US
dc.publisherUniversiti Kuala Lumpur Publishingen_US
dc.subjectVortex generatoren_US
dc.subjectheat transfer enhancementen_US
dc.subjectthermoelectric heat pumpen_US
dc.titleHeat transfer enhancement in a pipe using vortex generatoren_US
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
Heat transfer enhancement in a pipe using vortex generator.pdf241.23 kBAdobe PDFView/Open

Items in UniKL IR are protected by copyright, with all rights reserved, unless otherwise indicated.