UniKL IR: Recent submissions

  • EE Dispaly Signboard 
    Muhammad Nazreen Shah Bin Mohd Salleh (2015-09-22)
    This final report is established to fulfill the diploma project requirement for engineering project module WPD 39806 for final semester student, a standard guideline is prepared to standardize various documentations and ...
  • Mini Pneumatic Scissor Lift 
    Ahmad Sufi Bin Ahmad Mazlan (2015-09-22)
    By following project schedule, the project is finally complete on time. The division of work areas also helps the work to be more effective and running smoothly. Our final project, Mini Pneumatic Scissors Lift has been ...
  • Mailbox With Sensor And Buzzer 
    Muhamad Raies Bin Abdul Rashid (2015-09-22)
    The final report is set to meet the requirements for the diploma project WPD 39,806 engineering project modules for final year students, a standard prepared guidelines to streamline the various documents and reports is ...
  • Developement Of Ethernet Home Automation 
    Muhammad Fikri Hakim Bin Mohd Ayob (2015-09-22)
    This paper presents a low cost, flexible and standalone home devices control and monitoring system using an embedded arduino micro-web server, with real IP connectivity for accessing and controlling devices and appliances ...
  • Effect Of Heat Treatment On Fatique Strength Cruciform Fillet Welded Joint Mild Steel 
    Mohd Ikram Bin Mohd Nor (2015-09-21)
    The fillet weld cruciform joint mild steel using ER70S-6 filler metal was heated in oven at 400ºC for two hours. The different stress is applied on heat treatment and non heat treatment to find the strength of material ...
  • Sign Language Translator 
    Muhammad Afif Faiz Bin Mohd Noor (2015-09-21)
    Generally people with hearing impaired and speech disability use sign language based on hand gestures with specific motion to represent the ‘language’ they are communicating. A gesture in a sign language is a particular ...
  • Physical Modelling Of Active Four Bar Linkage Of Modular Hyper-Redundant Robot (MH-RR) 
    Lau Li See (2015-09-21)
    Active four bar linkage requires one active joint and the remainder three passive joints. The whole structure of four bar linkage can be used to alter the displacement and orientation of subsequent frame for Modular ...
  • Welding Simulation Of T-Joint And Y-Joint Tubular Of HSLA S355 Using Simufact Welding Software 
    Faris Hakim Bin Faisal (2015-09-21)
    Residual stress and distortion have become a major concern in the structural integrity of a welded structure. The residual stress which is undesirable is observed in steel welds after completion of solidification and after ...
  • Two Wheeled Self-Balancing Robot 
    Ahmad Abrar Bin Asha'ari (2015-09-21)
    This paper reports the design, construction and control of a two-wheel self-balancing robot. Two wheeled balancing robots are typical example of unstable dynamic system. Understanding the theory of inverted pendulum are ...
  • Fiber Properties: Strength From The Arrangement 
    Mohd Izzat Bin Othman (2015-09-21)
    In this project , a selected type of bamboo will be tested to determine which orientation have better strength. Then, the specimen is prepared according to American Society for Testing and Material (ASTM) test standards ...
  • Effect Of Treated Kapok Fiber On Aviation Oils Absorbency 
    Mohd Ainuddin Bin Khairuddin (2015-09-21)
    This project analyse the oil absorbency effect of treatment on kapok fiber with different types of aviation oil. Kapok fiber is a naturally renewable material with large lumen and hydrophobic characteristics, which enables ...
  • Describing Sinusodial Wave (Sine) In 3 And 4 Parameters 
    Abdullah Azam Bin Jaafar (2015-09-21)
    The research of this purpose is to define the sinusoidal wave, or popularly known as sine wave, in 3 and 4 parameters to be used in analyzing the data gained from a series of test performed on aluminum 5056 and fiberglass. ...
  • A Mock-Up Of A Simple Wireless Energy Transfer Application 
    Muhammad Syafiq Bin Bahari; Muhammad Hafiz Bin Kamarul Bahrin (2015-09-21)
    Hands on mock-up that shows the application of the wireless power transfer would enhance the aviation students understanding on the principle of mutual inductance. This is due to the fact that visual learning would give a ...
  • Experimental Assessment Of High Velocity Impact Damage On Aerospace Honeycomb Composite Materials 
    Ahmad Fadhli Rahimi Bin Nubli (2015-09-21)
    Determining how a material responds to ballistic impact is important for designing improved penetration-resistant structures. Historically, the majority of research into the effects of ballistic impact has been for curvature ...
  • Study Of Comparison Of Bending Strength Between Fiber Glass, Carbon Fiber And Hybrid Composite 
    Amirul Hafizuddin Bin Mustapah (2015-09-18)
    This study focus on comparison of bending strength between fiber glass, carbon fiber and hybrid composite. Research are done regarding the materials used in this study. Pure fibers are going through lamination process which ...
  • Factor Affecting Performance That Contributed To Human Error Review On Maintenance Crew Perspective 
    Aidil Adlee Bin Che Mee (2015-09-18)
    As the technology of an aircraft becoming more reliable, human has been more important causal role in aviation incident tragedy. Many of the earlier human factor lesson apparently had to be learn in hard way. In 1940, it ...
  • The Design And Analysis Of Tapered And Untapered Blades Of Horizontal Wind Turbine 
    Fatin Fatihah Binti Sharman (2015-09-18)
    To achieve the highest extraction of the wind energy, a high efficiency of the wind turbine is needed. There are difference of efficiency between horizontal axis and vertical axis wind turbine. In this paper an attempt is ...
  • Optimizing Lift By Different Number Of Spoke On Rotating Cylinder By Using CFD 
    Ahmad Mustafa Bin Abd Rahman (2015-09-18)
    Nowadays, almost all aircraft design must be design to have the capability to produce high lift to drag ratio especially during the take-off to reduce drag and at the same time will increase the lift. Normally people would ...
  • The Capability Of Membrane Tube Infusion In Vacuum Infusion Process For Non Structural Aerospace Component 
    Amir Farhan Bin Mohd Himsah (2015-09-18)
    The use of Vacuum Infusion Process (VIP) in the past years has proven that it is one of the best method in producing composites. It involves a mold with a reinforcement and sealed with vacuum tubing around it. The purpose ...
  • Comparison Of Strength Of Laminated Wooden Propeller Between Different Types Of Wood With Same Types Of Wood 
    Mohamad Faizzudin Bin Razali (2015-09-18)
    The idea of this project research was originally come out from my discussion with my supervisor, Mr. Sahid Bin Ahmad and also my co-supervisor, Dr. Malek and it is done by my understanding through my studies about laminated ...