UniKL IR: Recent submissions

  • Design Optimisation Of Airbus A320 Nacelle Hinge Bracket 
    Mohamad Shukrie Bin Ab. Rashid (2015-09-15)
    Researches have been conducted in order to reduce the weight of an aircraft. With the Additive Layer Manufacturing technology, it is a new and easier manufacturing process to produce parts of an aircraft. The design freedom ...
  • Fabrication Of Rigid And Flexible Acoustic Insulation Materials Based On Nonwoven Kapok Fibres 
    Izzat Zamil Bin Zainal Abidin (2015-09-15)
    Sound absorption properties of kapok composites and kapok fibrous mat have been investigated. Kapok fibrous assemblies with different thickness and matrix binder were manufactured, and their acoustical performances were ...
  • The Orientation and Strength of Riveted Joints on Aircraft Panel 
    Muhammad Ikhwan Bin Khairuddin (2015-09-15)
    The purpose of this project is to compare the strength between the riveted joints and which rivet has a better joint strength. In order to achieve this, sheet metal with aircraft specification is needed and must be riveted ...
  • Superbike Easy Lift Jack 
    Mohamad Asyraf Bin Ismail, Muhamad Syawal Bin Abdul Khair (2015-09-14)
    The objective of this final year project is to have a moveable jack that can move superbike while lifting. In early stage, the mechanic usually need some space to repair’s superbike. So, with this superbike easy lift jack ...
  • Robotic Arm Control Using Hand Gesture (Software) 
    Muhammad Aslam Bin Abdul Rashid (2015-09-14)
    A robotic arm is a mechanical arm which is designed to work similarly as a human arm does. It is usually programmable and arm may be a sum total of the mechanism or can be part of a complex robot. A 5 degree of freedom ...
  • Comparative Study Of The Effect In Different Level Of Heat Input In Ultraviolet Radiation Measurement In Gas Metal Arc Welding (GMAW) 
    Ahmad Noor Rifdi Bin R. Azmi (2015-09-14)
    The arcs associated with arc welding emit high level of ultraviolet radiation (UVR). The ultraviolet radiation exposure is known to cause potential effects such as erythema in skin and photokeratoconjunctivitis. Arc welding ...
  • IA-B114-07 Training Kit For C Language Programming 
    Ashraf Aiman Bin Zulkifli (2015-09-14)
    C Language is like the fundamental of the programming and commonly used in industries. C language is one of the language that every engineering student must learn. Nowadays, many systems have been designed and using C ...
  • Heat Transfer Simulation Of Cast Iron And Aluminium Cylinder Block 
    Ahlami Bin Abdul Latif (2015-09-14)
    This paper describes the cylinder block analysis by using finite element method (FEM). This paper is to study and prediction the thermal analysis and stress analysis against to the cylinder block with difference material ...
  • Study On Braking Perfomance Based On Brake Pad Products For The Passenger Car 
    Muhammad Khairuddin Bin Zainal (2015-09-14)
    Braking performance depends on the quality of the brake pads. After-market shop sells various types of brake pad’s product, including many premium brake pads brand available at these outlets. Premium brake pads are highly ...
  • A Conceptual Model Of Total Quality Management Implementation In Automotive Service Industry 
    Haqimi Bin Abdul Ghani (2015-09-14)
    Conceptual model of Total Quality Management will be proposed as a new reference into improving the quality management of the automotive service industry. This model can be used as guidance for the automotive service ...
  • ANALYSE THE PERFORMANCE HYBRID POWER GENERATION SYSTEM USING PIEZOELECTRIC - PV MODULE 
    MUHAMMAD ZAKHIRUDDIN BIN ABDUL RASHID (2015-09-11)
    Term of hybrid is used to show of mixed character or it can be composed of different elements. For this Final Year Project project, hybrid is used to show the combination of two harvesting system to produce single output ...
  • STUDY ON ZETA CONVERTER USING CONTINUOUS CURRENT MODE (CCM) 2 
    SHAHINI MAULA MUSAINI (2015-09-11)
    A Zeta converter is a fourth-order DC-DC converter made up of two inductors and two capacitors and capable of operating in either step-up or step-down mode. Compared with other converters in the same class, such as Cuk and ...
  • REAL TIME IMAGE ENHANCEMENT FOR UNDERWATER INSPECTION 
    MUHAMMAD HAZIMIN BIN MAT NURI (2015-09-11)
    For the last few years, when doing the exploring and analysing the underwater actions of images will gaining the importance for the future engineering in the underwater technology. This era, many scientists and explorer ...
  • WIRELESS ELECTRONIC NOTICEBOARD WITH MULTIPOINT RECEIVER 
    NURHAZREEN BINTI ZAINAL ARIFIN (2015-09-11)
    The general purpose of wireless electronic notice board with multipoint receiver is to broadcast the information wirelessly by using zigbee and Global System for mobile communication (GSM) technology communication. Notice ...
  • DESIGN OF DOOR SECURITY SYSTEM USING LABVIEW BASED APPROACH 
    MOHAMAD RAZIF B MOHD SOHAIMI (2015-09-11)
    The security door system is to control the door access from open and close. It is a combination of electrical, electronic and mechanical parts in the system. The purpose of security door system is for safety to properties ...
  • PERFORMANCE OF ORTHOGONAL FREQUENCY - DIVISION MULTIPLEXING DATA TRANMISSION IN GMDSS SCHEME 
    MAYAMIN BINTI MUNIR (2015-09-11)
    Orthogonal Frequency-Diversity Multiplexing, short formed as OFDM has been introduced in 1960s conceptually. It is developed to meet the increasing demand of higher data rates transmission. OFDM became a popular scheme ...
  • DEVELOPMENT OF LOW COST ROBOTIC ARM INTERGRATING WITH ROV FOR MODEL STUDY 
    NIK MOHAMMAD ARIF MUSTAQIM BIN AUDDIN (2015-09-11)
    Nowadays technology, robotic arm able to corresponding a human hand at almost 70% in theory. Many kinds of work can be operated by robotic arm even beyond of human capabilities. It moves using mechanical part connected at ...
  • VESSEL ENTRANCE SIGNAL 
    MIOR MUHAMMAD HIDIR BIN ZUN; MOHAMMAD LUKMAN BIN ABDUL RAZAK (2015-09-11)
    In the process of manufacturing a vessel entrance signal, there combining between buoy and sensor generate a this product. Most of the buoy made of fiberglass and sensor is using high technology like sonar wave, the student ...
  • DESIGN AND CONSTRUCT AUTOMATIC TRANSMISSION VEHICLES (ATV) 
    MUHAMMAD RAFIUDDIN BIN ABD RAHIM; ANWAR MUZAKKIR BIN MOHAMMAD; MOHAMMAD ZULKIFLI BIN SAIDIN (2015-09-11)
    Auto Transmission Vehicles (ATV) usually use in extreme activities and also in agriculture industries. This vehicles are been used in this industries due to the suspension and the toughness of the body. This ATV use the ...
  • DEVELOPMENT OF NEW DESIGN PROTOTYPE ROV INTERGRATED WITH ROBOTIC ARM AND HIGH DEFINITION CAMERA FOR UNDERWATER INSPECTION 
    AFIQ BIN AMER (2015-09-11)
    The project is carried out with the purpose of improving and creating new prototype / design to the previous ROV. With the highly developed in deep field especially oil and gas industry, the change and improvement of ROV ...