Recently added

4WD Transmission Teaching Aid

Amirul Syazwan Bin Shamsudin, Ahmad Faris Bin Aziz (2015-09-17)

4WD Transmission teaching aid is provide a 4WD Transmission System for student to improve their knowledge and skill about the system operating. . This teaching aid will be operate using electric motor to drive the transmission ...

Comparison The Effectiveness Between Penetrant Testing And Eddy Current Testing On Compressor Blade (Non-Ferrous Metal)

Muhammad Zamier Bin Kamaruzzaman; Mohamad Syahir Bin Mohamad Daud (2015-09-17)

The final year project thesis purpose are to study about the comparison in-between the effectiveness of the Penetrant Testing Fluoroscent (PT) and Eddy Current Testing (ET) on compressor blade (non-ferrous metal). The study ...

Fiber Treatment And Resin Ratio Characterization Of Kapok Composite Tensile Strength

Amzar Alif Bin Mohd Nor Apandi (2015-09-17)

The mechanical properties of short oriented use kapok fabric-reinforced composites were investigated with reference to the fabric content, keeping the volume of ratio of resin at 1:16, 1:20 and 1:29 with constant weight. ...

Diameter Of A Propeller Affect Its Thrust

Mohd Muqaffa Amynn Bin Abdul Hamid (2015-09-17)

The use of turboprop aircraft is now has become widely used by airliners due to its efficiency and cost saving. Many aviation companies have making their way to minimize the application of gas turbine engine in the industry ...

Investigation On The Use Of Fuel Cell Technology On Aircraft Electrical System

Amirul Aiman Bin Ahmad Ridzuan (2015-09-17)

Fuel Cells have been used on various thing including laptops, cell phones, and transports such as cars and even airplanes. Fuel Cells are able to reduce emissions, gains thermal efficiency, and one of the promising candidates ...

Design And Development Of Non Planar Wing (Box Wing)

Mohammad Ikhwan Bin Karim (2015-09-17)

Non planar wing such as box wing is said that it can be an alternative of efficient way in saving space in the hangar with a shorter wing span. Besides that, the box wing is supposed to help in increasing the efficiency ...

Thermal Analysis Of Reciprocating Engine Cooling Fins By Varying Its Shape And Thickness

Aizat Nizar Bin Nawawi (2015-09-17)

The purpose of this project is to analyze the thermal properties by varying shape and thickness of cooling fins. Thermal analysis determines temperatures and other thermal quantities that vary over time. The variation of ...

Analysis Process And Different Of Modified Sine Square Between Modified Damped Sine For Aluminium And Fiberglass

Abu Khalaf Bin Khalid (2015-09-17)

The purpose of this study is to analysis process and difference of modified sine 2 between modified damped sine for aluminium and fiberglass. In this research, the report briefly explained about the metal and the composite ...

Design And Development Of Non-Planar Wing (Staggered-Box) Aircraft Concept

Mohammad Siddiq Bin Abdul Karim (2015-09-17)

The configuration of the non-planar staggered-box wing is being determined by a specified NACA of 0012 which being made by using balsa wood and aluminium sheet. The effectiveness of the staggered-box is being tested ...

To Study The Suitability Of Chemical Bird Repellant To Minimize Bird Populations Around Aviation Sites

Mohamad Aizuddin Bin Mohd Eilham (2015-09-17)

This report is about the study on usage of Chemical Bird Repellent to chase birds away from UniKL MIAT area. It capable to release chemical automatically with a time interval. The device is simply install on preferred area ...

Optimizing Lift By Different Curvature Profile On Rotating Cylinder By Using CFD

Amirul Hakimi Bin Rok Man (2015-09-17)

It has been realized that the next generation of high performance aircraft must be designed to have the capability to produce high lift-to-drag ratio during take off. But few realized that a rotating cylinder can also ...

The Comparison On Strength Of Imported Woods Between Laminated And Non Laminated Propeller

Khairul Mustaqim Bin Khairuddin (2015-09-17)

Rotating cylinder wing designation in an aircraft wing configuration uses a simple cross-flow fan or just a simple cylinder shape that rotates. It provides distributed propulsion and augmented lift at very low flying speeds. ...

Study Of The Effectiveness Of Safety Management System In Malaysian Airline Berhad: A Case Study

Ohakpugwo Emmanuel Ejike (2015-09-17)

Aviation safety in the whole word today is a very essential research area at home and abroad. In recent years, human errors are causing to a catastrophic accident although safety is an important issue in aviation industry. ...

Fabrication And Strength Analysis Of Small Boat Hull Using Kapok And Fiberglass Reinforced Polyester Hybrid Composite

Mohamad Ikhmal Bin Mohd Aminuddin (2015-09-15)

This project presents the study of fabrication and strength analysis of small hybrid composite boat hull using kapok and fiberglass reinforced polyester. Recent studies showed that natural fiber such as kapok fiber has ...

Fabrication Of Thermal Conductivity Test Of Kapok Composite

Mohd Fiqri Bin Samat (2015-09-15)

Accurate measurement is an important and crucial part in material analysis. In this research, four samples of kapok fibrous mat of different thickness namely 3 mm, 5 mm, 7 mm and 9 mm is prepared and tested. Hot press ...

Human Error As A Threat To Aviation Industry View On Approved Maintenance Organization Perspective

Mohamad Zulhairi Azwan Bin Mazlan (2015-09-15)

U.S. statistics indicate that 80% of aviation accidents are due to human errors with 50% due to maintenance human factor problems. Current human factor management programs have not succeeded to the degree desired. Many ...

Optimizing Number Of Rivet For A Butt Joint By Using Tensile Testing

Mohamad Ikram Haiqal Bin Nor Sham (2015-09-15)

The purpose of this study is to find the appropriate number of rivet for a butt joint for tensile stress. In the aircraft, there are a lot of part that connected by using rivet. So, the correct number of rivet is needed. ...

Developing Software For Designing Patch

Abdul Syakur Bin Ahmad Afif (2015-09-15)

The purpose of the project is to develop software as an aiding tool in sheet metal repairs activities. The program is focusing on the designing patch for aircraft sheet metal repairs. The calculation by the program will ...

Design And Machining Process Of Crank Arm Using CATIA CAD/CAM

Ahmad Nazirul Mubin Bin Abd Halim (2015-09-15)

This project is to familiarize with the aerospace manufacturing that involved the use of CATIA CAD/CAM software. Each technology of machining must be supported by selection of the relevant geometry of cutting tools and ...

Development Of Halal Warehouse At Maskargo Sdn Bhd

Arina Suraya Binti Mudzafar Kamil (2015-09-15)

This research paper describes how Halal storage or Halal warehouse can be implemented at the air cargo industry. This research paper divided into five areas which are Chapter One, Chapter Two, Chapter Three, Chapter Four ...

Recently added

UniKL IR: Recent submissions

Search DSpace

Browse

All of DSpace

My Account