Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/4793
Title: Tool life of Micro-grained Uncoated Insert and Surface Roughness in Turning Titanium based alloy (Ti6Al4V) under Dry and Near Dry Condition
Authors: Ahmad Yasir M.S, Azman I
Zailan K, Mohammad Iqbal
Issue Date: 26-Nov-2013
Abstract: raditionally, machining titanium alloys only can be achieved with low cutting speed, massive cooling lubricant and at lower feed rates. Since the application of Minimum Quantity Lubricant is employed in recent machining activities and the development of cutting tools allow the machining of titanium alloys at higher speed within green machining approach. The full factorial design of experiment approach has been performed in turning titanium alloy (Ti6Al4V) and shows that Cutting Speed is the dominant element in the cutting parameters that controlling the tool life and followed by feed rates and Depth of Cut. Further analysis indicates the MQL application outrun the tool life in Dry cutting condition. The machined surface roughness is more sensitive to the tool wear and feed rates rather than cutting speed or cooling strategies.
Description: Conference Venue : UniKL MFI
URI: http://ir.unikl.edu.my/jspui/handle/123456789/4793
Appears in Collections:Conference Paper



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.