Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/25058
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWan Muhammad Izzat Wan Zaludin-
dc.contributor.authorNurul Zuhairah Mahmud Zuhudi-
dc.contributor.authorFadzil Adly Ishak-
dc.contributor.authorKhairul Dahri Mohd Aris-
dc.date.accessioned2021-07-21T08:39:48Z-
dc.date.available2021-07-21T08:39:48Z-
dc.date.issued2020-
dc.identifier.citationWan Muhammad Izzat Wan Zaludin, Nurul Zuhairah Mahmud Zuhudi, Fadzil Adly Ishak, Khairul Dahri Mohd Aris, Journal of Advanced Research in Dynamical and Control Systems, Volume 12, Issue 6, 2020, Pages 1767-1774, DOI: 10.5373/JARDCS/V12I2/S20201379en_US
dc.identifier.issn1943023X-
dc.identifier.urihttp://hdl.handle.net/123456789/25058-
dc.description.abstractWoven natural fabric has gain attention in the composite for its biodegradable materials, low in manufacturing cost, and easy to obtain. A preliminary experiment was conducted in order to determine the quality of impregnation process for woven bamboo and glass fabric pre-pregs. Nine pre-preg samples of woven bamboo fabric (WBF) and woven glass fabric (WGF) were fabricated for this investigation in order to identify the impregnation process using different parameters and their pre-preg quality. The fabrics were pre-impregnated with the epoxy-based resin and then the pre-preg were stacked using five plies for each composite. The composites were stacked and cured using vacuum bagging technique with the assisted of hot bonder. The qualities of physical and mechanical properties of the pre-pregs were evaluated based on the processing parameters used. The woven bamboo fabric pre-pregs have retained a slightly higher amount of resin content, approximately of about 55% in weight fraction compared to the woven glass fabric pre-pregs, which having about 50% of resin content, respectively. This preliminary experiment shows the potential application of woven bamboo as the candidate in the pre-preg systems, in which further optimization of controlling factors in their manufacturing process is suggested to be carried out in future research. © 2020, Institute of Advanced Scientific Research.en_US
dc.language.isoen_USen_US
dc.publisherInstitute of Advanced Scientific Research, Inc.en_US
dc.subjectResinen_US
dc.subjectWoven Bamboo and Glass Fabrien_US
dc.titleA preliminary experiment of the impregnation process of the bamboo and glass woven fabric pre-impregnated (Pre-preg) based on epoxy resinen_US
dc.typeArticleen_US
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
Abstract zaludin.docx12.24 kBMicrosoft Word XMLView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.