Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/28893
Title: | The Degradation of Mechanical Properties Caused by Acetone Chemical Treatment on 3D-Printed PLA-Carbon Fibre Composites |
Authors: | Ali Nahran, S. Saharudin, M.S. Mohd Jani, J. Wan Muhammad, W.M. (UniKL MIDI) |
Keywords: | Acetone Carbon fibre FDM PLA Post-treatment |
Issue Date: | 2022 |
Publisher: | Springer Science and Business Media Deutschland GmbH |
Citation: | Ali Nahran, S., Saharudin, M.S., Mohd Jani, J., Wan Muhammad, W.M. (2022). The Degradation of Mechanical Properties Caused by Acetone Chemical Treatment on 3D-Printed PLA-Carbon Fibre Composites. In: Ismail, A., Dahalan, W.M., Öchsner, A. (eds) Design in Maritime Engineering. Advanced Structured Materials, vol 167. Springer, Cham. https://doi.org/10.1007/978-3-030-89988-2_16 |
Abstract: | The paper presents the effect of short-term acetone chemical treatment on PLA-carbon fibre composite mechanical properties, manufactured using the fused deposition modelling (FDM) technique. In this research, PLA-carbon fibre’s tensile and dynamic mechanical properties were studied for six different treatment time (0, 60, 100, 120, 180, 220 s). The results suggested that retained acetone significantly reduced the mechanical properties of the PLA-carbon fibre as the treatment time increased. The maximum decrease in tensile strength was observed for the sample treated in acetone for 220 s. The tensile strength decreases about 62% compared to the untreated PLA-carbon fibre composite sample in acetone. SEM images revealed that acetone caused a plasticization effect and caused porosity that acts as a stress concentrator to the composites hence lowering mechanical properties. |
Description: | This article is index by Scopus |
URI: | https://link.springer.com/chapter/10.1007/978-3-030-89988-2_16 http://hdl.handle.net/123456789/28893 |
ISSN: | 18698433 |
Appears in Collections: | Journal Articles |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
The Degradation of Mechanical Properties Caused by Acetone Chemical Treatment on 3D-Printed PLA-Carbon Fibre Composites.pdf | 60.84 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.