Journal Articles: Recent submissions

  • IoT recycle management system to support green city initiatives 
    Nurul Aifah Liaqat Ali; Ruwaida Ramly; Aznida Abu Bakar Sajak; Rula Alrawashdeh (The International Journal of Integrated Engineering, 2019-08)
    This project introduces the design and development of IoT E-waste monitoring system to support Green City initiatives in real-time. The main objective of this system is to design an IoT-based recycle e-waste monitoring ...
  • The Enhancement of First Aid Treatment for Medical Facilities 
    Nur Syahela Hussein; Adib Ismail Khafidz; Masyarah Zulhaida Masmuzidin (Journal of Physics: Conference Series, 2019-11)
  • Entropy Generation Minimization of Two-Phase Flow in a Mini Channel with Genetic Algorithm 
    Syahrul Azwan Shaedi; Normah Mohd-Ghazali; Jong-Taek Oh; Yushazaziah Mohd-Yunos (Novel Carbon Resource Sciences, 2019-03-26)
    Performance of the two-phase flow in a minichannel had in the past been measured by the pressure drop or/and heat transfer coefficient. The desired low pressure drop across a small channel follows a low heat transfer ...
  • Enhance Safety and Efficiency by Controlling and Managing the Slip and Lapse Made by Individuals 
    Abdul Ghani Abdul Samad; Siti Nurmasturah Mat Yusoff (International Journal of Innovative Technology and Exploring Engineering, 2019-04)
    The purpose of the project is to identify factor that will cause slip and lapse and to reduce the maintenance error made by workers in slip and lapse. The project will be in quantitative and the instrument used is a survey ...
  • Email is evil!: Behavioural responses towards permission-based direct email marketing and gender differences 
    Ali Bassam Mahmoud; Nicholas Grigoriou; Leonora Fuxman; Dieu Hack-Polay; Fatina Bassam Mahmoud; Eiad Yafi; Shehnaz Tehseen (Journal of Research in Interactive Marketing, 2019-03-05)
    Purpose – This study aims to assess consumers’ beliefs in three Middle Eastern Arab countries regarding attitudinal and behavioural responses towards permission-based direct email marketing (here after DEM)and the moderating ...
  • Effects of Colloidal Nanosilica on Epoxy-based Nanocomposite Coatings 
    M.Parimalam; M.R Islam; R.Yunus; N.M Rashidi (Institute for Color Science and Technology, 2019-03-09)
    Epoxy-based nanocomposites were fabricated with different content of colloidal silica nanoparticles such as 10.0, 20.0 and 30.0 wt %, through solution casting. The covalent bonding interfaces, resulting from a ring-opening ...
  • Effective composite membranes of cellulose acetate for removal of benzophenone-3 
    rajesha Bedre Jagannatha; BalaKrishna R Geetha; Vishaka Diilnith; Mahesh Padaki; N.A.M Nazri (Journal of Water Processing, 2019-08)
    In thiswork,Cellulose acetate/Zinc oxide-Zeolite composite membranes were successfully synthesized via a simple DIPS method for the removal of benzophenone- 3 from water.The influence of the different concentrations of ...
  • Did Conventional Interest Rate Influence Islamic Total Deposits? Evidence From January 2007 Till January 2019 
    Abdul Razak Abdul Hadi; Hafezali Iqbal Hussain; Zalina Zainudin (International Journal of Financial Research, 2019-06-10)
    This study is carried out to examine the influence of Malaysian conventional interest rate and narrow money supply (M1) upon the growth of Islamic total deposits (ITD) in Malaysia Islamic financial system. Even though it ...
  • Developing a Virtual Reality (VR) App for Theory of Flight & Control as a Teaching & Learning Aid 
    Mohammad AnuarYusof; Abdul Malek Ya’acob; Mohd Azman MohdZaki; Zuriana Abdul Rahman; Nurul Husna Zainol Abidin; Irna Fazana Padil; Muhd Khudri Johari; Ismail A. Bakar; Hanif Faiq Mohd Hashim (International Journal of Innovative Technology and Exploring Engineering, 2019-04)
    This research focuses on how a group of lecturers, specialists, and final-year undergraduates developed a virtualreality app from scratch. By utilizing a combination of software (Autodesk Maya and Unity 3D) and hardware ...
  • Design the Monohull by Using Inventor Software 
    R.Ramli; N.M Sabri (International Journal of Mechanical Engineering Robotic Research, 2019-07)
    This research is about the design of the monohull by using Inventor software. The monohull is used to generate ship floating dry docks. There are two components to design the ship floating dry docks, main component and ...
  • Defect Analysis on Boeing 737-400 Skin Panel Rivet Row Aft Ward Fuselage 
    Mohammad Iqmal Mohd Ali; Azri Imran Hussin; Md Khairul Amiza Md Hairudin (International Journal of Innovative Technology and Exploring Engineering, 2019-04)
    Non-destructive testing defect analysis has been long used as a lead to safeguard against an incident due to damage limitation. This is especially vital for the aging aircraft to protection against possible issue respectively. ...
  • Crude Oil Price and Exchange Rates - The Case of Malaysia and Brunei 
    Abdul Razak Abdul Hadi; Hafezali Iqbal Hussain; Zalina Zainudin; Raja Reha (International Journal of Financial Research, 2019-06-10)
    This study is driven by the motivation to investigate the impacts crude oil price fluctuations on Malaysian and Brunei exchange rates as proxied by RM/USD and BD/USD respectively. Even though there is no specific economic ...
  • Corporate social responsibility in Malaysia 
    Sheikh Muhamad Hizam; Zulkarnian Iylia Syazana binti Othman; Mohammad Mohammad Amin; Zalina Zainudin; Mohd Faiq Abdul Fattah (International Journal of Financial Research, 2019-06-11)
    The field of corporate social responsibility (CSR) has developed exponentially in the last decade and is consistently getting to be a worldwide slant. Corporate social responsibility (CSR) has become a worldwide matter ...
  • Comparison of magnetic particle inspection of dry and wet method to the inspection on aircraft bolts 
    Mohammad Iqmal Mohd Ali; Muhammad Zarief Daniel Besri; Md Khairul Amiza Md Hairudin (International Journal of Innovative Technology and Exploring Engineering, 2019-05)
    Most inspection companies or any companies that involve in doing this inspection were usually do not have a clear view of which method was best to use in MPI. It is sometimes unclear whether the magnetic field was ...
  • Comparative Research of Wings with Riblets and Wings without Riblets in Terms of Drag Reduction and Lift Produced During Cruising Using Wind Tunnel 
    Mohammad Iqmal Mohd Ali; Muhammad Mustaqim Saad; Abdul Razak Mohd Noor (International Journal of Innovative Technology and Exploring Engineering, 2019-05)
    Energy conservation and aerodynamic efficiency are the reason behind the research into methods to reduce turbulent skin friction drag on aircraft. Skin friction reductions as small as 10 per cent provide the potential for ...
  • Assessment of knowledge and attitude among postnatal mothers towards childhood vaccination in Malaysia 
    Helvinder Kaur Balbir Sigh; Vishal Bhagwan Badgujar; Rose Suzila Yahaya; Santibuana Abd Rahman; Farheen Mohd Sami; Sangeeta Badgujar; Subhashini Nair Govindan; Mohammed Tahir Ansari (Human Vaccines & Immunotherapeutics, 2019-05-09)
    Aim: Mothers knowledge and attitude toward childhood vaccination influence uptake is the most adequate tool and preventive aspects to infectious disease epidemics. The present study assesses and measures knowledge and ...
  • Analysis on Propeller Design for Medium-Sized Drone (DJI Phantom 3) 
    Mohammad Iqmal Mohd Ali; Azri Nazarain Afandi; Ahmad Maulan Bardai (International Journal of Innovative Technology and Exploring Engineering, 2019-05)
    Abstract: Unmanned aerial vehicles, UAV, has increases in the drastically in these past several years because of their reliability, cost effectiveness and multi-functionality. Stage, research has been made on quadcopter ...
  • An empirical study in human resource management to optimize Malaysian School Counselling Department 
    Gholamreza Zandi; Ananda Devan Sivalingam; Shaheen Mansori (International Journal of Financial Research, 2019-06-10)
    This conceptual paper is to study the departmental improvement that needs to be implemented at Malaysian Schools Counselling Center by integrating Human Resources Management Practices. The study reviews literature on the ...
  • A Study of Accounting Outsourcing Decision: The Case of Malaysian SMEs 
    Gholamreza Zandi; Thee Kok Chuan; Shaheen Mansori (International Journal of Financial Research, 2019-06-10)
    Nowadays the costs of doing business have been increased and become more competitive than before. Hence, many organizations have been thinking to outsource activities which are not the core competence of the organization ...
  • A New Design of 2-Bit Universal Shift Register Using Rotated Majority Gate Based on Quantum-Dot Cellular Automata Technology 
    G. Prakash; Mehdi Darbandi; Nada Gafar; Noor Hafidzah Jabarullah; Mohammad Reza Jalali (International Journal of Theoretical Physics, 2019-06-14)
    Quantum-dot Cellular Automata (QCA) is emerging nanotechnology that can represent binary information using quantum cells without current flows. It is known as a promising alternative of Complementary Metal–Oxide Semiconductor ...

Search DSpace


Advanced Search

Browse

My Account