1. Research Paper: Recent submissions

  • N M Murad; N A Rawi; S Sharidan; Rahimah Mahat; (UniKL MITEC) (2021-01-21)
    Hybrid nanofluid is known to improve heat transfer performance, and its advantages have led to relatively reasonable expectations for their applications. This research will be considered moving wedge, namely the Falkner-Skan ...
  • Zirawani Baharum; Adlina Amran; Batrisyia Aiman Kamsul; Nahdatul Akma Ahmad; Noor Hidayah Azmi; (UniKL MITEC) (2021-01-21)
    Data visualizations make data easier for the human brain to understand, and visualization also makes it easier to detect patterns, trends, and styles in groups of data. With the development of the data visualization, more ...
  • Nurul Aifah Liaqat Ali; Ruwaida Ramly; Aznida Abu Bakar Sajak; Rula Alrawashdeh (The International Journal of Integrated Engineering, 2019-08)
    This project introduces the design and development of IoT E-waste monitoring system to support Green City initiatives in real-time. The main objective of this system is to design an IoT-based recycle e-waste monitoring ...
  • Nur Syahela Hussein; Adib Ismail Khafidz; Masyarah Zulhaida Masmuzidin (Journal of Physics: Conference Series, 2019-11)
  • Ruwaida Ramly; Aznida Abu Bakar Sajak; Hassan Dao; Megat Farez Azril Zuhairi (2020-08-24)
    This paper presents the design of a compact micro strip patch antenna at 2.4 GHz for wireless sensor networks (WSNs) applications. Wireless sensor networks (WSNs) consist of nodes with a limited power source with compact ...
  • Yasmin Yahya; Roslan Ismail (2019-01)
    The use of inventory technique that creates the coordinate of trees, made the simulation for predicting future growth using individual trees, or tree mapping, possible. The techniques predict the growth of trees, as well ...
  • Mohamad Shahrul Effendy Kosnan,; Nur Humaira Hamri,; Fatin Ayuni Mohd Suhaimi,; Zulhaimi Mohammad,; (UniKL MITEC). (2020-03-15)
    Sand demand is currently very high and constantly increased up to cause problems in the construction industry. In an effort to solve this problem, various studies have been conducted as an alternative to replace the use ...
  • Hairul Rizad Md Sapry,; Maizatul Iqma Ahmad Razali,; Abd Rahman Ahmad,; (UniKL MITEC). (2020-03-15)
    The Department of Defense has a very large and complex distribution for its supply system. To store all their goods, they need to set up a very good and organized Warehouse for every army unit form different places. The ...
  • Syahrul Azwan Shaedi; Normah Mohd-Ghazali; Jong-Taek Oh; Yushazaziah Mohd-Yunos (Novel Carbon Resource Sciences, 2019-03-26)
    Performance of the two-phase flow in a minichannel had in the past been measured by the pressure drop or/and heat transfer coefficient. The desired low pressure drop across a small channel follows a low heat transfer ...
  • Abdul Ghani Abdul Samad; Siti Nurmasturah Mat Yusoff (International Journal of Innovative Technology and Exploring Engineering, 2019-04)
    The purpose of the project is to identify factor that will cause slip and lapse and to reduce the maintenance error made by workers in slip and lapse. The project will be in quantitative and the instrument used is a survey ...
  • Nur Syarafina Mohamed; Mustafa Mamat; Mohd Rivaie; Shazlyn Milleana Shaharuddin; (UniKL MITEC) (2020-02-11)
    Hybridization is one of the frequent approaches in modifying the Conjugate Gradient (CG) method. In this paper, a new hybrid CG is introduced, and its performance is compared under two different line searches; exact and ...
  • A.W. Mohamad Ikbar; A.L Norernawati; M.D Mohd Amran; S. Khairanum; A. Allina; B. Rahmat Roslan; H. Sallaudin; M.T. Mohd Zul Waqar; A. Khairul Firdaus; (UniKL MITEC) (2020-02-11)
    Nowadays, toilet is no longer apparent as merely insignificant component for the public facilities especially related to the tourism area. The facilities in the toilet contributes and serves more than the initial purposes ...
  • Ali Bassam Mahmoud; Nicholas Grigoriou; Leonora Fuxman; Dieu Hack-Polay; Fatina Bassam Mahmoud; Eiad Yafi; Shehnaz Tehseen (Journal of Research in Interactive Marketing, 2019-03-05)
    Purpose – This study aims to assess consumers’ beliefs in three Middle Eastern Arab countries regarding attitudinal and behavioural responses towards permission-based direct email marketing (here after DEM)and the moderating ...
  • Nur Syahela Hussein; Zahidah Abd Kadir; Roslinawati Jaafar; Wan Ahmad Amirul Asyraf Wan Muhd Nazmi (2020-02-05)
    Paper is the most important thing in our lives and has been promoted in many years to recycle paper but still, the attention is lacking. Most of our daily routine will probably start using paper and end with the use of ...
  • Mohd Hafizul Ismail; Nurashikin Saaludin; Siti Nur Dina Hj Mohd Ali (2020-02-05)
    The purpose of this study is to investigate the effects of language anxiety on two levels of classes learning Korean as Foreign Language (KFL) at Universiti Kuala Lumpur (UniKL). This study will examine the differences in ...
  • Ruwaida Ramly; Aznida Abu Bakar Sajak; Puteri Nordiana Nonmaria (2020-02-05)
    It is understood that Low-Carbon Transportation will contribute to a reduction of 29% of Green House Gases (GHG). Moving towards this goal, Nadi Putra, the public transportation using natural gas in Putrajaya, Malaysia is ...
  • Suriana Ismail; Roslan Ismail; Tengku Elisa Najiha Tengku Sifizul (2020-02-05)
    The manual detection of breast disease cannot detect occurances of potential high risk problem for a patient at the early stage. Since it it a commonly found disease among women, its critical to overcome the problem as ...
  • Mohd Aliff; Mohamed Alif Dinie; Ismail Yusof; Nor Samsiah; (UniKL MITEC) (2020-01-23)
    Over the past decade, significant papers have shown that rehabilitation exercise is efficient in enhancing Parkinson's disease efficiency. However, the previous devices in Parkinson Disease Rehabilitation are not very ...
  • Mohd Aliff; Abdul Halim Hamdi; Ismail Yusof, Nor Samsiah; (UniKL MITEC) (2020-01-23)
    NC machine now widely used in industry especially in cutting process. It is precision cutting machine but however the effectiveness of this machine is less effective because it used manual handling to operate. For manual ...
  • M.Parimalam; M.R Islam; R.Yunus; N.M Rashidi (Institute for Color Science and Technology, 2019-03-09)
    Epoxy-based nanocomposites were fabricated with different content of colloidal silica nanoparticles such as 10.0, 20.0 and 30.0 wt %, through solution casting. The covalent bonding interfaces, resulting from a ring-opening ...

Search DSpace


Advanced Search

Browse

My Account