1. Research Paper: Recent submissions

  • Mechanical and Thermal Performances of Woven Twill Flax Fabric Polypropylene Based Composites 
    Nurul Mahmud Zuhudi; Khairul Dahri Mohd Aris; Muhammad Ariff Mokhtar; Mior Azman Mohamed (Science and Engineering Research Support Society, 2020-04-23)
    In these years, bio-composites have gained constant attention especially flax due to its striking capabilities for various functions. The advantages of the flax fabric is predictable to give higher strength properties due ...
  • Linkage between Knowledge Sharing, Organizational Culture, Employee Creativity in Manufacturing Organizations 
    Md Fauzi Ahmad; Naima Andleeb; Mohd Fahrul Hassan; Nor Aida Abdul Rahman; Arman Shah Abdullah (ExcelingTech, 2020)
    Creativity relevant literature relevant is diverse in approaches. As a result, there has been a lack of cohesive theoretical understanding of how employee creativity operates and gets affected in organizations. The purpose ...
  • Factors influencing sustainable supplier selection: Evidence from palm oil refining and oleochemical manufacturing industry 
    Suresh Anand Vijayakumaran; Suzari Abdul Rahim; Aidi Ahmi; Nor Aida Abdul Rahman; Ahmad Uzair Mazlan (ExcelingTech, 2020)
    This study focuses on the sustainable supplier selection in Malaysia palm oil refining and oleochemical manufacturing industry. A sustainable supply chain could lead to smoothness in the long run and thus ensure higher ...
  • Design of Full-Bridge Rectifier for Underwater Remotely Operated Power Supply Unit 
    Dahalan, W. M.; Othman, Norhafizah; Mohamid Salih, Noorazlina; Abdul Karim, Mohd Harkikie Fitri; UniKL MIMET (Springer Singapore, 2020)
    Rectifiers or AC/DC converters are widely used in industrial applications. Input AC voltage is rectified into DC voltage and smoothen using the filtering circuit which consists of electrolytic capacitors. The 220VAC, 50 ...
  • Carbon Emissions Measurement Using Portable Emission Device in Coastal Fishing Boats 
    Zainol, Ismail; Ahmad, Z.M.; Ridwan, S. N.; Z., M. Zaifurizal; Dahalan, M. R.; Kamal, A.; Salleh, Zulzamri; UniKL MIMET (Springer Singapore, 2020)
    This paper measure the carbon emission from small scale fishing boats. Carbon emissions were measured from two types Class A Malaysian fishing boats marine engines covering various size of inboard engines and outboard ...
  • BMI Monitoring System Using LabVIEW 
    Mohd Zainee, Norhayati; Kamil, Md Salim; Mazlan, Norazimah; Che Ishak, Ismila; UniKL MIMET (Springer Singapore, 2020)
    Unhealthy eating habits and less physical activity had led to the growing number of obesity population and becoming a health problem in Malaysia. The objective of this study is to monitor the BMI index by using LabVIEW and ...
  • Application of Contactless Inductive Charging for Ship - A Review 
    Zainol, Mohd Zaifulrizal; Zainol, Ismail; Abu Bakar, Alif Akmal; Abd Razak, Mohd Faizal; Zoolfakar, Redzuan; UniKL MIMET (Springer Singapore, 2020)
    The research review the application of contactless inductive charging for marine applications. Contactless power transfer (CPT) is the method to transfer power between two separately coil that known as primary and secondary ...
  • An Investigation on the Overall Efficiency of a Ship with Shaft Generator Using an Engine Room Simulator 
    Yutuc, Wilfredo,; UniKL MIMET (Springer Singapore, 2020)
    The use of a marine shaft generator onboard is considered an alternative means to reduce fuel consumption and improve the energy efficiency of a ship. It is a type of an electric generator driven by the main propulsion ...
  • Viscosity of mono vs hybrid nanofluids: Measurement and comparison 
    Fadzli, K.; Abdullah, M.Z.; Mazlan, N.M.; Mohamaed, A.R.; Janvekar, A.A.; Nasir, F.M. (IOP Conference Series: Materials Science and Engineering, 2020)
    The authors aimed to look into the viscosity investigation of mono and hybrid Aluminium Oxide/Silicon Oxide (Al2O3/SiO) based nanofluids. The viscosity methods were carried out for mono nanofluids as well as hybrid nanofluid, ...
  • Simulation of SPWM fed three-phase induction motor drive mathematical model using MATLAB simulink 
    Rasyadan, A.; Yaacob, S.; Krishnan, P.; Rizon, M.; Ang, C.K. (2020)
    Three-phase induction motors are used in a vast area of applications mainly due to their simplicity, ruggedness and high reliability. With recent advancement in semiconductor technologies, the use of fixed speed induction ...
  • Scale adaptive region covariance descriptor for visual tracking 
    Abu Hassan M.F.; Pri A.S.; Ahmad Z.; Tuan Dir T.M.A. (IOP Conference Series: Materials Science and Engineering, 2020)
    This paper presents an adaptive approach for scale estimation in a tracking-by detection framework. The proposed method works by learning covariance descriptor based on multi-layer instance search region. Our results show ...
  • Optimization of Sintering Parameters of 316L Stainless Steel for In-Situ Nitrogen Absorption and Surface Nitriding Using Response Surface Methodology 
    Ali, S.; Rani, A.M.A.; Mufti, R.A.; Ahmed, S.W.; Baig, Z.; Hastuty, S.; Razak, M.A.; Aliyu, A.A. (Processes, 2020)
    This research investigates the simultaneous sintering and surface nitriding of 316L stainless steel alloy using powder metallurgy method. The influence of sintering temperature and dwell time are investigated for maximum ...
  • Numerical Investigation of Fluid Flow and In-Cylinder Air Flow Characteristics for Higher Viscosity Fuel Applications 
    Hamid M.F.; Idroas M.Y.; Sa'ad S.; Heng T.Y.; Mat S.C.; Alauddin Z.A.Z.; Shamsuddin K.A.; Shuib R.K.; Abdullah M.K. (Processes, 2020)
    Generally, the compression ignition (CI) engine that runs with emulsified biofuel (EB) or higher viscosity fuel experiences inferior performance and a higher emission compared to petro diesel engines. The modification is ...
  • Monitoring of Gear Surface Roughness in Angle Grinder using Vibration Analysis 
    Yusuf, Z.N.M.; Sidek, N.S.D.; Hamid, M.N.A.; Teoh, P.Y. (IOP Conference Series: Materials Science and Engineering, 2020)
    This paper aims to provide the relation between surface roughness of angle grinder towards vibration amplitude. Prolong usage of angle grinder over excessive force will affect the performance of angle grinder where it tends ...
  • Modelling and Closed-loop Control System for Magnetorheological Elastomer Linear Actuator 
    M N Hazwan Hadzir; Muhamad Husaini Abu Bakar; Ishak Haji Abdul Azid (IOP Conference Series: Materials Science and Engineering, 2020)
    Controlling the actuator in micro to microscale positioning is the challenge in the development of smart material actuator. The design of the existing commercial piezoelectric actuator is limited due to the material ...
  • Investigation of Scribing Quality Defect of Thin Film Solar Cell Using Machine Vision 
    R Shuaimi; R C Ismail; M N Hazwan Hadzir; M N M Isa; A B Jambek (IOP Conference Series: Materials Science and Engineering, 2020)
    Laser micromachining provide significant effect in thin film solar industrial field especially in determining cell efficiency of each panels. However, there is an issue in determining scribing failure or defect on solar ...
  • Evaluation of clinacanthus nutans leaves extract on prothrombin time and activated partial prothrombin time test 
    Abd Rahman, Nur Farahhim; Muhsin, Azlina; Che Azmi, Norhaida (J. K. Welfare and Pharmascope Foundation, 2020-01-08)
    Limitations in existing anticoagulants have prompted a search for the natural origin of anticoagulants. Since there is an increasing need to source for pharmacological and medicinal materials from a plant source, thus an ...
  • Effects of Urban Morphology on Microclimate Parameters in an Urban University Campus 
    Zaki, Sheikh Ahmad; Othman, Nurnida Elmira; Syahidah, Siti Wan; Yakub, Fitri; Muhammad-Sukki, Firdaus; Ardila-Rey, Jorge Alfredo; Shahidan, Mohd Fairuz; Mohd Saudi, Ahmad Shakir (MDPI AG, 2020-04-01)
    This study investigated the effects of urban morphology on microclimate parameters in an urban university campus in Malaysia. Outdoor air temperatures (Tout) were recorded at eight different locations inside the campus for ...
  • Effects of Roadside Trees and Road Orientation on Thermal Environment in a Tropical City 
    Zaki, Sheikh Ahmad; Toh, Hai Jian; Yakub, Fitri; Mohd Saudi, Ahmad Shakir; Ardila-Rey, Jorge Alfredo; Muhammad-Sukki, Firdaus (MDPI AG, 2020-02-01)
    Emerging tropical cities are experiencing rapid population growth and development, which can greatly affect the thermal environments. The effects of roadside trees and road orientation on the outdoor thermal environment ...
  • Assessing of water quality and sedimentation problems in lata sungai limau, Malaysia 
    Kamarudin, Mohd Khairul Amri; Abd Wahab, Noorjima; Abu Samah, Mohd Armi; Mohd Saudi, Ahmad Shakir; Ismail, Azimah; Toriman, Mohd Ekhwan; Mohd Hamzah, Firdaus; Muhammad Hafiz, Md Saad; Hoe, Loh Ing; Md Bati, Siti Nor Aisyah (Desalination Publications, 2020-05)
    Sedimentation problem and water quality deterioration are the occurrences happened along the river basin especially at main river basin in Malaysia. The main objective of this study to review the sedimentation problems and ...

Search DSpace


Advanced Search

Browse

My Account