• Transient Analysis of Directional Magneto Rheological Fluid Valve Using Computational Fluid Dynamic 

  Nurul 'Ain Farhana binti Ahmad Zainol (2014-03-07)

  The MRF valve have been designed and developed by many researchers. However, the behaviour of the fluids in the valve, how fluid reacts and the characteristic of the fluid flow in the valve still lack in info and research. ...
• The Performance and Characteristics of 4-Stroke SI Engine Liquefied Petroleum Gas (LPG) 

  Alimmi Fuzail bin Mah Hussin (2014-03-07)

  Concern about fast depletion of petroleum-based fuels and its environmental impact has led many researchers to find other alternatives fuels. Research‟s studies on Liquefied Petroleum Gas (LPG) has demonstrated that it is ...
• Temperature Control for Electrical Vehicle Car Battery. 

  Firdaus bin Ismail (2014-03-07)

  This temperature control for electrical vehicle car battery can be control by using a microcontroller when it detects certain temperature that has been set in the microcontroller program. The purpose of this project is ...
• Studying of Electrical Capacitance Tomography Optimization for Radial Length and Shielding Noise (ECT) 

  Onn biin Ali Othman (2014-03-07)
• Study on Two (2) Types of Coolant on Cutting Speed and Surface Roughnessusing Surface ace Grinding Machine 

  Norsafiah binti Mat Said (2014-03-07)

  This research presents a comparative study on two types of coolants performance through experimental investigation in the surface grinding of conventional grinding machine. Cooling methods used in this experimental were ...
• Study on Traffic Sign Recognition 

  Illanggo A/L Muniandy (2014-03-07)

  Traffic sign recognition can help the driver to make a right decision at the right time for safe driving. The realization of traffic sign recognition system usually divided into three stages: detection; tracking and ...
• Study on New Design of Automotive Component Steering Wheel by Using Ergonomics 

  Mohd Nor Hafizi bin Nordin (2014-03-07)

  Dimension of hand has been measured from student and staff Universiti Kuala Lumpur Malaysian Spanish Institute to study the anthropometric data. This data using to improve the design of steering wheel for more ergonomic ...
• Simulation Study of Using Refrigerant for Thermal Management of EV Battery Pack 

  Wan Muniras binti Wan Zawawi (2014-03-07)

  Battery Thermal Management system (BTMS) is critical in achieving performance and extended life of batteries in electric vehicle (EV) under real driving conditions. In this work, the impact of cooling strategies using ...
• Position Control of DC Brush Motor Using Digital PID 

  Mohamad Al Ashraf bin Che Ani (2014-03-07)
• Pioneer Development of Solar Panel 

  Nurul Nadia binti Zainiun (2014-03-07)

• Transient Analysis of Directional Magneto Rheological Fluid Valve Using Computational Fluid Dynamic 

  Nurul 'Ain Farhana binti Ahmad Zainol (2014-03-07)

  The MRF valve have been designed and developed by many researchers. However, the behaviour of the fluids in the valve, how fluid reacts and the characteristic of the fluid flow in the valve still lack in info and research. ...
• The Performance and Characteristics of 4-Stroke SI Engine Liquefied Petroleum Gas (LPG) 

  Alimmi Fuzail bin Mah Hussin (2014-03-07)

  Concern about fast depletion of petroleum-based fuels and its environmental impact has led many researchers to find other alternatives fuels. Research‟s studies on Liquefied Petroleum Gas (LPG) has demonstrated that it is ...
• Temperature Control for Electrical Vehicle Car Battery. 

  Firdaus bin Ismail (2014-03-07)

  This temperature control for electrical vehicle car battery can be control by using a microcontroller when it detects certain temperature that has been set in the microcontroller program. The purpose of this project is ...
• Studying of Electrical Capacitance Tomography Optimization for Radial Length and Shielding Noise (ECT) 

  Onn biin Ali Othman (2014-03-07)
• Study on Two (2) Types of Coolant on Cutting Speed and Surface Roughnessusing Surface ace Grinding Machine 

  Norsafiah binti Mat Said (2014-03-07)

  This research presents a comparative study on two types of coolants performance through experimental investigation in the surface grinding of conventional grinding machine. Cooling methods used in this experimental were ...
• Study on Traffic Sign Recognition 

  Illanggo A/L Muniandy (2014-03-07)

  Traffic sign recognition can help the driver to make a right decision at the right time for safe driving. The realization of traffic sign recognition system usually divided into three stages: detection; tracking and ...
• Study on New Design of Automotive Component Steering Wheel by Using Ergonomics 

  Mohd Nor Hafizi bin Nordin (2014-03-07)

  Dimension of hand has been measured from student and staff Universiti Kuala Lumpur Malaysian Spanish Institute to study the anthropometric data. This data using to improve the design of steering wheel for more ergonomic ...
• Simulation Study of Using Refrigerant for Thermal Management of EV Battery Pack 

  Wan Muniras binti Wan Zawawi (2014-03-07)

  Battery Thermal Management system (BTMS) is critical in achieving performance and extended life of batteries in electric vehicle (EV) under real driving conditions. In this work, the impact of cooling strategies using ...
• Position Control of DC Brush Motor Using Digital PID 

  Mohamad Al Ashraf bin Che Ani (2014-03-07)
• Pioneer Development of Solar Panel 

  Nurul Nadia binti Zainiun (2014-03-07)
• Particle Swarm Optimization (PSO) Controller Tuning of Underwater Thruster 

  Nur Atiqah Norazmi (2014-03-07)

  A proportional-integral-derivative (PID) controller is very popular in applications that require an easy and comprehensive control. In this project, a Particle Swarm Optimization (PSO) technique is integrated with PID ...
• Optimization of Microchannel Design for Liquid Cooling 

  Muhamad Sharizal bin Mohd Shahabudin (2014-03-07)

  In order to study the heat transfer of different designs of radiator, a test rig that represent scale-down version of the actual radiator has been built. This project work focuses on developing an optimized micro-channel ...
• Numerical Investigation on the Heat Transfer Enhancement and Fluid Flow Phenomena Multi-piezoelectric Fans 

  Khalid Alwalid bin Mazlan (2014-03-07)

  Piezoelectric fan (hereafter named as piezofan) is a thin beam and oscillate in sinusoidal motion when it imposes an alternate current on the piezoelectric material. This motion like a handheld and will induce flow on ...
• Numerical Analysis of Lead Free Solder Ball During Reflow Process 

  Mohamad Faris bin Misbah (2014-03-07)

  Reflow soldering is one of the most significant factors in development of surface mount technology (SMT), especially toward the lead-free and miniaturization of the advanced ball grid array (BGA) package. Moreover, an ...
• Motorcycle Braking Performance Test 

  Afiq bin Kamal (2014-03-07)

  This project is focuses on studying the motorcycle brake performance test in term of braking distance, stopping time, brake efficiency and kinetic energy using 3 combination of brake (front drum + rear drum, front disc + ...
• Modular Underwater Thruster Design and Analysis for MSI300 

  Tarmizi bin Ahmad (2014-03-07)

  The ocean’s living resources are a treasure for current and future generations of humankind. To sustain the resources, the scientists start to develop underwater vehicle such as ROV’s and AUV’s to seabed mapping and ...
• Modelling of Magneto-rheological Elastomers (MRE) Fan Using Matlab 

  Maisharah binti Hussin (2014-03-07)

  Magneto-rheological elastomers (MREs) can be use as actuator because the MREs are soft material and flexible material. L. C. Davis (1999), say the Magneto-rheological elastomers are soft actuators which generate stress or ...
• Infrared Tomography for On-Line Monitoring in Conveyor System 

  Zul Hairee bin Che Ya (2014-03-07)
• Infrared Tomography for On-Line Monitoring in Concrete Testing 

  Masitah binti Abd Hamid (2014-03-07)

  This project will describe the development of a tomography system by employing the infrared sensor as a main component. The purpose of this project is to reconstruct the 2 dimensional (2D) images based on range detection ...
• Improving Roof Air Ventilation System Through Sustainable Structure Design 

  Sheikh Ahmad Fariddudin bin Ahmad Badrudin (2014-03-07)

  Current modern housing design in Tropical Climate region like Malaysia relies heavily on the use of mechanical ventilations such as fans and air-conditionings to achieve indoor thermal comforts. These houses are built with ...

View more