Final Year Project - UniKL BMI: Recent submissions

  • Development of Wind Power Lighting System for The Highway 
    Mohd Shahrin bin Ismail; Bachelor of Engineering Technology in Electrical (2014-10-07)
    Wind energy is considered as the fastest growing clean energy source however it is limited by variable natural wind. Highways can provide a considerable amount of wind to drive a turbine due to high vehicles traffic. This ...
  • Practice of DSM for commercial buildings (Female Hostel UniKL BMI) 
    Ruhidayu binti Mohd Yusof; Bachelor of Engineering Technology in Electrical (2014-10-07)
    Qualitative review of Demand Side Management (DSM) program evaluations identifies multiple factor absent from achievable potential estimates. DSM objective is to modify of consumer demand for energy through a various ...
  • Development of Ricehopper Detection System (RiDS) for Remote Implementation on Paddy Fields in Northwest Selangor Agriculture Development (PBLS) Area 
    Nur Husna Izzati Hashim; Bachelor of Engineering Technology in Electronics (2014-10-07)
    This project present and focus on the ricehopper detection system. The title of this project is “Development of Ricehopper Detection System (RiDS) for Remote Implementation on Paddy Fields in Northwest Selangor Agriculture ...
  • Analyzing the Performance of VoIP Codecs in IEEE802.11 Network Environment 
    Rossila Bt Radzali; Bachelor of Engineering Technology in Data Communications (2014-10-07)
    Voice over Internet Protocol (VoIP) is a rapidly growing technology that enables transport of voice over data networks. This growth of the technology is due to the integration of voice and data traffic over existing ...
  • Smart Mailbox 
    Khidir bin Zulkifli; Bachelor of Engineering Technology in Electrical (2014-10-07)
    Mailbox is very important in our daily life. Every letter or document is coming from postman will enter to the mailbox as a third party and the house owner can take the letter presence in the mailbox. This mailbox are ...
  • Development for Smart Plant Watering System Using Water Wheel Power Energy 
    Mohamad Khairul bin Ramli; Bachelor of Engineering Technology in Electrical (2014-10-07)
    This project describes the design and development of pico-hydro generation system (less than 5 kW generation capacities) using the energy of flowing rain water apply for the plant watering system. The rain water will be ...
  • Autonomous Board Erasing Robot 
    Ku Mohd Syafiq bin Ku Ahmad; Bachelor of Engineering Technology in Electronics (2014-10-07)
    The goal of this project is to create a robot that is capable to climb the whiteboard and clean it with just flipping a single switch. Arduino UNO R3 is the main processor that controls the robot behaviour. The robot can ...
  • Performance Analysis of Dynamic Routing Protocol in IPv4 and IPv6 network 
    Muhammad Hafiz bin Azmee; Bachelor of Engineering Technology in Data Communications (2014-10-07)
    The general purposes of this project is to analyze on which Dynamic Routing Protocol between EIGRP (Enhanced Interior Gateway Protocol) and OSPF (Open Shortest Path First) work best in IPv4 or IPv6 network. IPv6 have greater ...
  • Development of Smart Egg Incubator Using Arduino 
    Mohd Nizamuddin bin Noorazmi; Bachelor of Engineering Technology in Electrical (2014-10-07)
    Incubator is a device used in egg incubation process. Using incubator the process of incubation can be speed up and the egg can be incubates in large quantity of scale. There are many development of egg incubator today ...
  • The study of Rain Height for Rain Fade calculation in satellite communication link budget over Malaysia 
    Nuur Azzreen binti Kassim; Bachelor of Engineering Technology in Data Communications (2014-10-07)
    Satellite communication systems operating above 10 GHz are used for broadband multimedia and internet based services. At this high range of frequencies, the signal will be affected by various propagation impairments ...
  • Analysis Study of Single Phase to Three Phase Power Converter by using Static Conversion Method 
    Imran Hanif bin Mohd Ali; Bachelor of Engineering Technology in Electrical (2014-10-07)
    This project presents a development of single-phase to three-phase converter by using static conversion method. The power converter will be able to convert the single phase 240 VAC supply to balanced three phases 240 VAC ...
  • Development of Rain Energy Harvester 
    Mohd Saiful Syazwan bin Mohd Yusoff; Bachelor of Engineering Technology in Electrical (2014-10-07)
    Development of rain energy harvester is the latest technology how to generate electricity by using rainwater energy. It’s a technology used to collect and store rainwater falling on the roof using simple techniques. Common ...
  • A Development of Smart Methane Gas Device Detector for Vehicle 
    Muhammad Amin bin Che Mat; Bachelor of Engineering Technology in Electrical (2014-10-07)
    This research study is to design a solution for methane gas leaks from the NGV tanks. Methane gas detection projects main idea is to implement security system for detecting leakage of gas in closed environment. In this ...
  • Study and Simulation of Distributed Intrusion Detection System in Wireless Network 
    Puteri Azmin Azlina Adzmi; Bachelor of Engineering Technology in Data Communications (2014-10-07)
    This project involves the study of intrusion detection system (IDS) and distributed intrusion detection system (DIDS) in a wireless networks. IDS work by observing a computer system for any sign of intrusion through anomalous ...
  • Sms Alert System For The Water Filter Vending Machine 
    Muhammad Hanif bin Musa; Diploma of Engineering Technology in Electrical and Electronics (2014-10-03)
    This project aims to develop and design an alert system for vending machine by accepting the short message service (SMS) through global system mobile (GSM modem) to create a signal system for owners of the vending machine. ...
  • Sms Alert System For The Water Filter Vending Machine 
    Muhammad Edzman bin Ahamad; Diploma of Engineering Technology in Electrical and Electronics (2014-10-03)
    This project aims to develop and design an alert system for vending machine by accepting the short message service (SMS) through global system mobile (GSM modem) to create a signal system for owners of the vending machine. ...
  • Automatic Cloth Hanger 
    Khairul Azram bin Mohd Said; Diploma of Engineering Technology in Electrical and Electronics (2014-10-03)
    Nowadays, technology plays important role in life. Invention of a particular thing has shown its capabilities to ease human hectic daily life.This project is proposed to facilitate the need of human basis which is drying ...
  • Automatic Cloth Hanger 
    Hafizuddin bin Haron; Diploma of Engineering Technology in Electrical and Electronics (2014-10-03)
    Nowadays, technology plays important role in life. Invention of a particular thing has shown its capabilities to ease human hectic daily life.This project is proposed to facilitate the need of human basis which is drying ...
  • Sophisticated But Economical School Timer 
    Muhammad Afifi bin Mohammad Anuar; Diploma of Engineering Technology in Electrical and Electronics (2014-10-03)
    To fulfill the diploma final project requirement for the diploma student, a standard guideline is prepared to standardize documentation various. This document is only for final project and it is recommended that the final ...
  • Sophisticated But Economical School Timer 
    Mohd Shawal bin Zainal Ariffin; Diploma of Engineering Technology in Electrical and Electronics (2014-10-03)
    To fulfill the diploma final project requirement for the diploma student, a standard guideline is prepared to standardize documentation various. This document is only for final project and it is recommended that the final ...

Search DSpace


Advanced Search

Browse

My Account