Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel

dc.contributor.author	Baharudin, Bakhtiar Ariff
dc.contributor.author	Hussain, Patthi
dc.contributor.author	Ayob, Fauzuddin
dc.contributor.author	Ab Rahman, Fauziah
dc.contributor.author	Megat Khalid, Puteri Zarina
dc.contributor.author	Abdul Hamid, Darulihsan
dc.contributor.author	UniKL MIMET
dc.date.accessioned	2022-01-28T07:05:57Z
dc.date.available	2022-01-28T07:05:57Z
dc.date.issued	2022-01-28
dc.identifier.issn	2195-4364
dc.identifier.uri	http://hdl.handle.net/123456789/25304
dc.description	This article indexed by scopus	en_US
dc.description.abstract	The diffusion bonding is one of the methods used to join dissimilar metals. Specimens of duplex stainless steel and low carbon steel were joined by diffusion bonding under varied temperature and holding time. The specimens were clamped using jigs and heated in a furnace. Tensile test was performed on the joined samples. The effect of bonding time and holding temperature on tensile strength and quality of the diffusion bonds were observed. Tensile strength of the joints was examined and the highest tensile strength of 116.12 MPa are obtained at temperatures of 900 °C and holding time of 180 min.	en_US
dc.language.iso	en	en_US
dc.subject	Diffusion bonding	en_US
dc.subject	Dissimilar metals	en_US
dc.subject	Duplex stainless steel	en_US
dc.title	Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel	en_US
dc.type	Book chapter	en_US
dc.conference.year	2020	en_US