Abstract:
The purpose of this project is to help the amputees by creating a device that
can alert the users about the excess pressure inside the artificial limb. This device is
to detect the excess pressure between the prosthetic limb and the skin surface of the
patient. For an example mechanical forces during physical activities of the amputee
that can lead to breakdown of soft tissues at the stump, which can prove very difficult
to heal and will inevitably result in distress for the patient. The pressure will detected
using the Force Sensor Resistor (FSR) component. There are three levels of
pressure in this device, which is low pressure, medium pressure and high pressure.
A certain range of pressure will represent the level. For an example, a range for a
low pressure is below than 8 Newton. A medium pressure is between 8 Newton until
12 Newton and for the high pressure, the range value is above than 12 Newton. The
higher the value, the higher the pressure. When the pressure reach the high
pressure level, the buzzer will activate as to inform the user that the excess pressure
inside the artificial limb is too much pressure. This project is the combination of
electric supply, Force Sensor Resistor (FSR), LCD, and microcontroller (Arduino). As
to complete this project, there are a few step need to be taken which are the change
of pressure, power supply, Force Sensor Resistor, design controlling circuit using
Arduino, developing a source code for the Arduino and use a suitable apparatus to
design all circuits. As a conclusion, this project is to design and construct a pressure
sensor for prosthetic limb which will be controlled by microcontroller (Arduino).
Different level indicates a different pressure.
