Abstract:
The applications of electronic devices with low power consumption, such as wireless sensor network and electronic communication devices, are rapidly increasing. Thus, utilizing environmental energy as an alternative to electrochemical battery, which has a finite lifespan, can be a great advantage to these electronic devices. Harvesting environmental energy, such as solar, thermal, wind flow, water current, and raindrops, has attracted increasing research interest in the field of energy harvesting. In this paper, harvesting sound energy in the form of pressure waves is investigated as an alternative to existing energy harvesting methods. In the experimental work, a piezoelectric generator lead zirconate titanate (PZT-5A) cantilever type is used to extract sound energy from the loudspeaker from various distances and then to convert this energy into electrical energy. A direct piezoelectric effect operating in 31 coupling mode is used. The maximum voltage generated by the piezoelectric generator occurs when its resonant frequency is operating near the frequency of sound. An analytical method with an appropriate equation is used to determine the resonant frequency and is then validated using the experimental result. The result shows that the maximum output voltage of 26.7 mVrms was obtained with the sound intensity of 78.6 dB at resonant frequency of 62 Hz at 1 cm distance in the first mode. In the second mode, the maximum output voltage of 91 mVrms was obtained with the sound intensity of 102.6 dB at resonant frequency of 374 Hz at 1 cm distance which is larger than that of the first mode. However, for both modes, voltage decreases as distance increases.
