Final Year Project - UniKL MIDI: Recent submissions

  • New Design of Shock Absorber’s Compressor with Safety Features 
    Mohd Norhashidee Bin Hussin (2014-12-08)
    The new design of spring compressor is utilized to compress a helical coil spring of a coil-over shock absorber as well as MacPherson strut suspension assembly. A spring compressor of the type having a wide base provide ...
  • Integration of Hot Forming Solver with Hyperwork (Pre-Processor) Using TCL/TK Programming 
    Ahmad Faisal Bin Mustapa (2014-12-08)
    Finite element analysis is one of the numerical computation which help automotive industries to validate stamping process before virtual try out. The algorithm framework of implicit and explicit non-linear geometry is ...
  • Determination and Validation of Material Removal Rate by Actual Machining in Drilling Operation 
    Muhammad Ridhwan Bin Murad (2014-12-08)
    This research focuses on determining and validating the Material Removal Rate (MRR) by actual machining of drilling operation. Drilling operation is still widely used in the aerospace, aircraft and automotive industries ...
  • Determination and Validation of Material Removal Rate (Mrr) by Actual Machining in Turning Operation 
    Wellamb Semion (2014-12-08)
    With the growth of manufacturing companies worldwide the utilization of machining processes become one of the most important operations. The wastes which are generated from the machining process usually are recycled ...
  • Optimization of Inventory Control 
    Nuraini Husna Binti Fadzil (2014-12-08)
    This project is about to counter the problem which there is an excessive shim on production floor in SPIRIT Aerosystem company. The shims are used only for the gap size measured while assembled the stay arm assembly which ...
  • Sitting and Squatting Toilet 
    Abdul Qawi Bin Abd Halim (2014-05-15)
    Toilet Usage Is A Routine For Human To Excel Wastes And The Product Is Currently Being Use From Ages Differently Depends On Culture Or Many Other Aspects. Toilets Used Daily By Humans, And Its Use Is Required By The Nature ...
  • Sustainability Design Furniture 
    Nuurain Zubaidah Binti Mohd Aman (2014-05-12)
    Sustainable Furniture Is A Furniture That Made From Material That Can Be Recycled Or Re-Purposed, Renewable And Safe Material. The Purpose Of Sustainable Furniture Is To Reduce Waste Material So That The Waste Can Be ...
  • Ergonomics Seat for Reading and Memorizing Holy Al-Quran 
    Mohamad Faizy Bin Kasno (2014-05-12)
    Sitting On The Floor When Read And Memorized The Qur'an Is Considered As A Medium For Them To Meet The Criteria In The Ergonomic Position. The Problem Are Nerve Pain When Sitting On Too Long According The Right Position ...
  • Economy Class Aircraft Seat for Special People 
    Jeirsan Abbasi Larki (2014-05-12)
    The Paper Explain With Current Economy Class Aircraft Seat Design Involved Functionality, The Paper Report Result And Form Public People Expectation And Requirement And How The Customer Requirement Transferred Into Technical ...
  • Islamic Dishwasher for Food & Beverages Industry in Malaysia 
    Wan Mohd Izzuddin Bin Wan Hamad (2014-05-07)
    The existing problems from this study state the consumer ambiguity on dishwashing process at food place hotel or restaurant in Malaysia that have a provided services food & beverages. There are certain eating places mix ...
  • Study of Increasing the Utilization of Library Online in UniKL by UniKL IPROM’s Student 
    Ahmad Rafiq Bin Yaacob (2014-01-09)
    The abstract in this project focuses on some methods on how to increase the utilization of library online database in UniKL by IPROM’s students such as run strict regulations for outsiders servers by make an agreement with ...
  • Effect of Machining Parameter on Hardness During Turning Inconel 718 Under Minimum Quantity Lubrication (MQL) 
    Muhammad Haizriq Bin Hamsani (2014-01-09)
    Inconel 718 has become a leading material among superalloy materials and this material is referred to a family of austenitic nickel-chromium-based superalloys. These materials are known as the higher sheer strength, low ...
  • Design And Fabrication Of Wafer Plate Fixture for I / V (Ampere/Voltage) Testing Process 
    Muhamad Khairulddin Bin Ismail (2013-12-16)
    This report explains in detail the methodology used for design and fabrication of wafer plate fixture for I / V (ampere/voltage) testing process. The method used in this project to reduce cycle time on inspection process. ...
  • Design Ang Manufacture of Two Plate Mould to Produce Plastic Bag Holder (Analysis) 
    Muhammad Ehsan Bin Sharipan (2013-12-16)
    Final year project has its own aims and objectives to students. It gives a real exposure in produce a project, begin with development of idea until project completed. Besides that, students were trained to think creative ...
  • Solar Wafer Dryer Product 
    Nazmil Husaini Bin Ab Latiff (2013-12-16)
    As an institute of Product Design and Manufacturing yet its tag line “ Where Knowledge is Applied”, this report ‘s author is realized that it is important to have an actual product to be used as a study module for further ...
  • Mechanical System and Development on Tapioca Slicing Machine 
    Abdullah Sirajjudin Bin Mohamad (2013-12-13)
    This report presents the mechanical system and development of tapioca slicing machine that is used internal system on this machine. The important aspect of the mechanical system is the machine can come out high volume ...
  • Fragile Goods Luggage for Aircraft Passenger. (Exterior) 
    Kamsan Bin Abd.Jalil (2013-12-13)
    This report presents the mechanical design system and development of exterior part of luggage that is on this project. The important aspect of the mechanical system is the luggage can come out with new design and increase ...
  • Mini Track System with Multipurpose Carrier (Multipurpose Carrier) 
    Tengku Akramin Bin Tengku Mansor (2013-12-13)
    Today’s surveillance system and advertising method in public places such as in supermarket is very limited on its capabilities. Hence, the static and traditional techniques in monitoring and also promoting in public ...
  • Design on Vertical Axis Wind Turbine (VAWT) for Low Wind Speed in Malaysia 
    Mohd Hafizuddin Bin Mustaffa (2013-12-13)
    This project is about the design on vertical axis wind turbine (VAWT) for low wind speed in Malaysia. The final design of wind turbine is tested using Computational Fluids Dynamic (CFD), a feature from the Solidworks ...
  • Conceptual Design for Hybrid Street Light Performance 
    Mohd Asraf Bin Hanafiah (2013-12-13)
    The paper explain with conventional street light and advance design and technology of producing better street light, the paper reports and result from current design and performance of technology applied, requirement and ...

Search DSpace


Advanced Search

Browse

My Account