DSpace Repository

Browsing by Author "(UniKL MFI)"

Browsing by Author "(UniKL MFI)"

Sort by: Order: Results:

  • Characterization of Oxide Growth on Surface of Al-Mg-Si Welded Joint 
    Azman Jalar; Nur Azida Che Lah; Norinsan Kamil Othman; Roslinda Shamsudin; Abdul Razak Daud; Syed Roslee Sayd Bakar; (UniKL MFI) (Hindawi, 2014)
    Al-Mg-Si (AA6061) Al alloy plates were joined by the method of gas metal arc welding using Al-5Mg (ER5356) filler metal and were subjected to the oxidation test in flowing air environment at from 8 to 40 hours and the ...
  • Characterization of Oxide Growth on Surface of Al-Mg-Si Welded Joint 
    Azman Jalar; Nur Azida Che Lah; Norinsan Kamil Othman; Roslinda Shamsudin; Abdul Razak Daud; Syed Roslee Sayd Bakar; (UniKL MFI) (Hindawi, 2014-02)
    Al-Mg-Si (AA6061) Al alloy plates were joined by the method of gas metal arc welding using Al-5Mg (ER5356) filler metal and were subjected to the oxidation test in flowing air environment at from 8 to 40 hours and the ...
  • Clustering Four Bit Sequence Control for Serpentine Gait of Hyper Redundant Robot System 
    Samsi Md Said; Amir Sharizam Ismail; Ishkandar Baharin; (UniKL MFI) (IEEE, 2014-11)
    Snake robot or hyper redundant robot is very complex robotic system since it posses very large active and passive degree of freedom. To simplify the design, modeling and locomotion, a simpler approach is needed. In this ...
  • A Conceptual Model of Inventory Management System using an EOQ Technique – A Case Study in Automotive Service Industry 
    Eida Nadirah Roslin; Siti Norhafiza Abdul Razak; Mohd Zaki Bahrom; Muhammad Aizat Abd Rahman; (UniKL MFI) (Universiti Kuala Lumpur Publishing, 2015-12)
    The successful implementation of inventory management system (IMS) in an organization will give the high impact to their business growth and sustainability. Due to the rapid growth in the automotive industry, the need of ...
  • Conceptual of Spherical Robot 
    Murniwati Anwar; Lukman Hakim Omar; Yusof Mohd Ekhsan; Ruwaida Ramli; Nurzulaikhah Nadzri; Fazil Ahmad; Muhammad Hazman Shafii; (UniKL MFI) (IEEE, 2014)
    This paper is about the development of a prototype spherical robot in UniKL MFI under Industrial Automation Department. There are two phases of development. The first phase of development is to design the basic spherical ...
  • Cure Behaviour of a Fast Reacting Green Polyurethane Adhesive System 
    Norazwani Muhammad Zain; Sahrim Ahmad; Ernie Suzana Ali; (UniKL MFI) (Universiti Kuala Lumpur Publishing, 2015-12)
    Cure behaviour analysis of a fast reacting thermosetting system is critical in the manufacturing process of laminated composites. This study focuses on the investigation of the cure kinetics of polyurethane (PU) adhesive ...
  • Development of Fuzzy Logic Based Odor Detection 
    Azahar T. M.; Norlaila Ashikin, M. S; Nuwairah, A.; (UniKL MFI) (Universiti Kuala Lumpur Publishing, 2015-12)
    The development of electronic nose technologies has come through advances in sensor design, material improvements and software innovations. The integration of fuzzy logic technique in the electronic nose gives a new ...
  • Effect of Dry Machining on Tool Wear During Turning Al 6061 by Using Different Type of PVD and CVD Coated Carbide Inserts 
    Syed Azuan Syed Ahmad; (UniKL MFI) (American-Eurasian Network for Scientific Information, 2013-04)
    Industries and researchers are trying to reduce the use of cutting fluids in metal cutting to obtain safety, environmental and economical benefits. Machining without the use of any cutting fluid so called dry machining is ...
  • Effect of Fiber Volume Fraction on Tensile Properties of Rice Husk Reinforced Polyester Composites 
    Syed Azuan Syed Ahmad; (UniKL MFI) (American-Eurasian Network for Scientific Information, 2013-06)
    The effect of fiber volume fraction on the tensile properties of rice husk reinforced polyester composites was studied. Tensile properties was evaluated by using different volume fraction of rice husk fibers, (5%, 10%, 15% ...
  • Factors contributing to Graduate on Time in a Technical University: Lecturers’ Views 
    Jamel Othman; Farakh Diba Mohamed; Tuan Salwani Salleh; Norhayati Bakri; Asma' Mohd Fauzi; (UniKL MFI) (Universiti Kuala Lumpur Publishing, 2015-12)
    The aim of this study is to identify the factors that contribute to students’ timely graduation at a technical university. The strategies practiced by an undergraduate program to produce high percentage in graduating on ...
  • Heat transfer enhancement in a pipe using vortex generator 
    Mohamad Asmidzam Ahamat; Mohd Firdaus Beludtu; Razali Abidin; (UniKL MFI) (Universiti Kuala Lumpur Publishing, 2015-12)
    This paper presents the use of a pair of vortex generators to increase the heat transfer coefficient in laminar and turbulent flow inside a circular pipe. A pair of vortex generator with a height of 6 mm and angle of attack ...
  • Integrated Kurtosis-Based Algorithm for Z-Notch Filter (I-kazTM) Multilevel Coefficients Responses toward the Simultaneous Changes in Amplitude and Frequency of Signals 
    Zailan Abdul Karim; M.Z. Nuawi; A.Y. Md Said; J.A. Ghani; S. Abdullah; (UniKL MFI) (Science Alert, 2013)
    The response of Integrated Kurtosis-Based Algorithm for Z-Notch Filter (I-kazTM) Multilevel coefficients toward the simultaneous changes in amplitude and frequency of signals was unknown. This study presents the coefficients ...
  • Transforming Teaching and Learning Approach of Mathematics and Image Processing 
    Zalhan Mohd Zin; Tuan Salwani Salleh; Norhayati Bakri; (UniKL MFI) (Universiti Kuala Lumpur Publishing, 2015-12)
    Mathematics can be considered as fundamental elements of many technical subjects in various disciplines. Inability to realize the importance of mathematics and its applications in technical subjects are some of the reasons ...